mustangstofear

Looks like it turned out very nice so far. If I didn't know better, I would say those are our MTF engine panels :)

We should have pricing next week. I'm  always  amazed at how much  Stainless Works charges for setup fees :(

We use mineral spirits all the time, but it won't remove urethane only butyl .

This is all mandrel bent 2 1/2  Stainlees steel

This is all mandrel bent 2 1/2  Stainlees steel

Nice work. What you will find out is that even though it fits your car perfectly, once you start selling them to customers that have replaced the Qtrs, end caps and tailpanels , it won't fit the same. 

Can't wait to see  what the engine  looks like, the polished EFI  Webber'scost over 10,000 alone.

When  I fill the gasket with urethane I go back  over the gasket with a  bone to squeeze out any excess.  I  wait at least a day or 2 before installing the chrome  trim. Doing it right away  makes a big mess.

On a 69-70 You would have to remove the backglass if you went back  original, with ours nothing  is removed. You are correct  about a lot of  warranty  problems with TMI. Their  problem  from the  beginning has always been  separating, ours will never  do that or ever stain.

Looks like it's in excellent shape, and from CA. to boot.

Headliners  are on order with our  manufacturer :)  pricing  should be  in the  neighborhood of the 69-70 fastback. 

We moved  the seat risers back  as far as we could  and still be able to get the nuts on. The color  is a special  one from  PPG,  I'll have to look it up.

The coupe headliners are all 329.95 Now that  gas has dropped down to under 1.50 a gallon, the freight company's has raised the cost by 20.00 :(

They would be the same price as our 65-68 coupes, 329.95.

We normally run a 18x9 with a 5.5 backspace if we're not going to tub it. The 275 fits great. 

The car turned out very nice,  but I'm very disappointed with all of our parts that's on the car we weren't even mentioned with the rest :(

It's fiberglass.

I'm seriously looking at doing the headliner for the coupe. I found a very nice and depenable guy that has been making molds for me. So, what I really need to know is how much demand is there for it  ? I have at least 40 other new products I could spend my money on.

I talked to Dave on Thursday and he said he's getting very close to finishing it up. This was a very challenging project for him. 

Installing our MTF mini tubs. You can also see how we moved the seat belt anchors forward in the tunnel.

Here is what we've been working on.