prayers1 153 Report post Posted December 9, 2015 There is a great interest in Self Tuning EFI's in all aftermarket cars, I too would like to get one for my 69 351C, but there is the cost factory that has prevented me from doing so. The big name companies are selling theirs for around $2500. A new company, FiTech has been on the market for the past year and has been selling theirs for around $995. They have had some great reviews on the web as well as VMF. It has been suggested on this site that if we get enough members interested in a FiTech product that they might give us a group discount. I've enclosed some info about the product, but I suggest that you go on their FiTech website to educate yourself. Also there is a lot of info on the VMF website. If your interested in a group discount, please let me know. Please note that I am not the main source for this and if someone else wants to put up a a seperate survey or has a different approach, please do so. Thanks! Go EFI 4 - 600 HPFour-Injector Throttle Body EFI Suitable for up to 600HPThe Go EFI 4 Self Tuning Fuel Injection is rated at 600 HP but is suitable for engines from 250 HP thru 600 HP. This system is perfect for your everyday Driver right up to your weekend Street Machine or Bracket Racer. It features the FASTEST most accurate Self Learning available, Timing control, Wet flow Annular discharge and tons of additional features.It fits any 4-bbl intake manifold and is the most self-contained and full-featured unit of this type. The ECU (computer) is mounted on the throttle body, which greatly simplifies installation. No hole in your firewall and no unsightly harness draped across your engine. This is also the only computer mounted throttle body that offers spark control without the need for an external spark box or special distributor. It also has a built-in fuel pressure regulator. A hand-held controller features a touch screen for quick and easy initial set-up.Note that this EFI system can also be used with an engine compartment mounted Fuel Command Center, which provides a returnless system. See Command Center details in the description below. Click HereA Complete List of features of the Go EFI System30001/30002 Kit ContentsDie Cast Throttle bodyHandheld ControllerWindshield Mount(4) Hi-Flow 600 HP injectorsBuilt-in pressure regulator2.5 BAR Internal MAP SensorThrottle Position SensorIdle Air ControlCoolant Temp SensorWide band O2 SensorO2 Bung Kit-06AN Fuel Inlet FittingGasket Kit20' of -6 fuel hose and 5' of -8 hose & fittingsMounting brackets(4) Hi-Flow 600 HP injectorsInitial setup is quick and easy. Simple touch screen selections get you up and running in minutesSelf-tuning** After startup the ECU immediately takes over and provides your vehicle with an optimum tune!Basic install can be done with just 4 wires and 2 sensors to installUses the latest Bosch 4.2 wide band O2 sensor while all other sensors are easily replaceable GM style partsThe ECU is mounted on the throttle body so there is NO external boxes or harnesses to clutter up your engine compartment or under dash. This saves you a huge amount of time and keeps things simple and neat.Throttle bodies have a completely universal base to fit any 4-bbl manifoldThrottle Linkage suits most transmissionsChoice of three fuel inlet connectionsAll Go-EFI’s feature Voltage Control fuel pump control. This feature reduces the voltage to the pump under low load conditions such as idle and cruise thus reducing noise and heat. This will extend the life of your pump and keep the fuel in the tank cooler and your ears from ringing!Go-EFI Systems feature Wet flow technology and have a unique Swirl Spray Annular discharge design that assures COMPLETE ATOMIZATION!! Check out our videos, you need to see it.Ignition timing can be controlled and adjusted on the fly from your touch screen controllerAir Fuel ratios can be optimized on the fly as you drive! Try that with your CarbPart #30001 &30002 feature 1 adjustable fan control switchWill work with CDI box but not required to control timingBuilt in Fuel pressure regulator. No extra regulator to mount on your fire wall.Manufactured with OE engineering. Our ECU’s are used Globally and pass euro 5 emissions standards in new vehicles Quote Share this post Link to post Share on other sites
Rsanter 152 Report post Posted December 9, 2015 I am the one that suggested the group buy. And I would be interested in one or two of them. I also have a side buisness so I could buy from them wholesale but they will likly want a minimum order buy in to do so. If there is enough interest I can contact them to see what their terms may be. However if there is someone else that wants to take the reins on this or has a buisness and wants to do the wholesale purchase of a bunch of them, I will certainly not get in their way Bob Quote Share this post Link to post Share on other sites
SM69Mach 68 Report post Posted December 9, 2015 I would be interested in this as well. Would also be interesting in their Fuel Command Center as well. I have seen through other websites that there appears to be a bit of a back order on them right now. Might want to get full details on supply because they are flying off the shelves according to other sites. Quote Share this post Link to post Share on other sites
rwcstang 201 Report post Posted December 9, 2015 I'd be interested too Quote Share this post Link to post Share on other sites
MikeStang 247 Report post Posted December 9, 2015 I am In, just have to be sure they have provisions for a TPS Control. If so where do I send the cash Quote Share this post Link to post Share on other sites
bryonbush 85 Report post Posted December 10, 2015 I'm down Quote Share this post Link to post Share on other sites
shaun071 62 Report post Posted December 10, 2015 I'm interested it may be subject to the aussie dollar exchange rate and postage though. Looks to be a great system. Quote Share this post Link to post Share on other sites
Shep69 149 Report post Posted December 10, 2015 I'm with you Shaun. I've been looking at the FiTech system for a while now. The Aussie dollar sucks so I have been holding off. Hope it fits under the shaker. Quote Share this post Link to post Share on other sites
69ISH 10 Report post Posted December 10, 2015 I'm with you Shaun. I've been looking at the FiTech system for a while now. The Aussie dollar sucks so I have been holding off. Hope it fits under the shaker. You can be my test bunny, let me know how you go and what manifold you are running Please. Quote Share this post Link to post Share on other sites
shaun071 62 Report post Posted December 10, 2015 My life story- when the dollar was at parity I had no cash. I came into some cash the dollar drops to 80c overnight!!! If I get the system now I can run it on the 302 then fit it to the 351c when it's ready Quote Share this post Link to post Share on other sites
prayers1 153 Report post Posted December 10, 2015 69ish, I have the Blue Thunder Manifold. I'll keep ya posted. Quote Share this post Link to post Share on other sites
Rsanter 152 Report post Posted December 10, 2015 I will call them today if I can Quote Share this post Link to post Share on other sites
Shep69 149 Report post Posted December 10, 2015 You can be my test bunny, let me know how you go and what manifold you are running Please. Rodney I'm running a performer rpm . Still haven't fitted the shaker yet as I'm in the middle of doing the panel work then paint. Quote Share this post Link to post Share on other sites
blueblood 26 Report post Posted December 10, 2015 I'm with you Shaun. I've been looking at the FiTech system for a while now. The Aussie dollar sucks so I have been holding off. Hope it fits under the shaker. I like the look of that system as well, but our dollar is worse than yours. About 67c to the NZD right now Quote Share this post Link to post Share on other sites
prayers1 153 Report post Posted December 10, 2015 I emailed FiTech- "How soon is the Go EFI 4 - 600 hp available for delivery!"Here's the response:We have multiple in stock and they are ready normally for either same day or next day shipping. Just let us know when you want to purchase and we can get that setup.Thanks!Sales at FiTech EFI Reach us at 951-340-2624 or Sales@FiTechEFI.com Rsanter- Have you tried to give them a call? Quote Share this post Link to post Share on other sites
Rsanter 152 Report post Posted December 11, 2015 I did speak with one of the gals there and she offered a 10% discount to us. While that does help I would like to get more if we can. One of the guys I would need to talk with is out of the office till next week. I will see what he says but from talking to her it looks like we would have to buy about 10 of them before we would be getting better pricing Bob Quote Share this post Link to post Share on other sites
fordguy69 24 Report post Posted December 12, 2015 10% sounds like a pretty good deal considering how much cheaper these systems are compared to the competition. If they would apply that to the eight injector system, I might buy another one myself. Quote Share this post Link to post Share on other sites
prayers1 153 Report post Posted December 12, 2015 Great Job Rsanter! Keep us posted. Quote Share this post Link to post Share on other sites
shaun071 62 Report post Posted December 12, 2015 Sounds like good deal so far. Checked the exchange rate and it's doable for me. Good work mate! Quote Share this post Link to post Share on other sites
cavboy78 28 Report post Posted December 12, 2015 I've been doing some research on EFI for a while now and ready to pull the trigger soon. I was thinking of going with the MSD Atomic setup, but this may be too good a deal to pass up. Count me in for now. I'll do some more reading and make sure this will do everything I need it too. Thanks for the work rsanter! Quote Share this post Link to post Share on other sites
prayers1 153 Report post Posted December 12, 2015 Since we all have basically the same car and will be using the EFI 4 or 8 injector, post any information you guys have regarding your experiences. Also, it would be a good ideal if we post how we went about the GasTank choice, Fuel Command Center, Internal or External Fuel pump, Return and Vent line hook ups. As for me, Im having a hard time figuring out how to vent the system. I've read some use the filler tube and connect a fitting to it then run a vent hose to it. Tanks Inc, makes a good 22 gal EFI tank with the fuel pump included. Also there is the Aeromotive pump that you cut a hole in the tank near the front top corner. Does anyone know how to start a survey, this way we can get a good head count on how many want the group discount????? Quote Share this post Link to post Share on other sites
Jefhuf 13 Report post Posted December 13, 2015 Interested in a group buy of the EFI but also a tank if that becomes a possibility too Quote Share this post Link to post Share on other sites
ronz75 10 Report post Posted December 13, 2015 I have been reading about this system over the past month. I would be very interested in a group buy. Quote Share this post Link to post Share on other sites
craigm 25 Report post Posted December 13, 2015 I am interested, just let me know the details. Quote Share this post Link to post Share on other sites
shaun071 62 Report post Posted December 13, 2015 I didn't know they were doing a 22gal tank. I'd be interested but the freight would put it out of reach. I was looking at getting a new stock tank and fitting the fuel pump module from a late model Falcon. It is a common mod here in Australia for efi. Quote Share this post Link to post Share on other sites