aslanefe
Members-
Content Count
1,314 -
Joined
-
Last visited
-
Days Won
39
aslanefe last won the day on January 17
aslanefe had the most liked content!
About aslanefe
-
Rank
v8 powered poster
Profile Information
-
Location
: Mid GA
Recent Profile Visitors
3,179 profile views
-
I have been using that gas cap lock on one of my cars for years, it stopped people from playing with my gas cap, trying to steal it etc.
-
Looks like we need a mod in Russia.
-
69 rocker panel molding is aluminum, not stainless. It is bright dipped anodized (as far as I remember). It has to be stripped then anodized again after it is buffed/polished. If not anodized, it will dull. Buffing usually do not remove the anodization as it is a hard coating. Buffing the anodized part will make it a little shinier but not as shiny as original. The repro ones are okay, they are made from softer material but anodized. You need to deburr the ends so it won't scratch your paint, may need to grind the ends to fit the fenders better etc and the hole for the screw at the aft end of the right side may need to be tweaked. I was missing the left side molding on my 69 Grande so I used a repro set with above work, can't remember if it was from NPD but am happy with it.
-
Turning kick panel vent openings into speaker enclosures
aslanefe replied to ThePoose's topic in 1969-70 Technical Forum
A small bucket, some plywood, masking tape and tin sheet. -
Turning kick panel vent openings into speaker enclosures
aslanefe replied to ThePoose's topic in 1969-70 Technical Forum
See my post from April 22, 2021 on this link for couple ideas. https://1969stang.com/forum/index.php?/topic/48584-what-did-you-do-tofor-your-mustang-today/page/86/&tab=comments#comment-317302 -
Brian, the bolt that goes through the valance to the fender extension on top right of the above picture missed the clip nut.
-
70 vert quarter panels and quarter extensions are different that 69 coupe, 69 vert and 70 coupe quarter panels and quarter extensions. Vic's quarter panel and quarter extension is correct for a 70 vert. 70 vert quarters and quarter extensions have the body line behind the wheel (like 69 vert and coupe quarter panel and extension), 70 coupes have smooth quarter (without body line) and matching quarter extension. 69 vert quarter panel and quarter extension is same as 69 coupe quarter panel and quarter extension with the recess for the molding in front of the wheel on the quarter panel; 70 vert and coupe quarters do not have the recess for the molding in front of the wheel. 70 coupe quarter panels are not reproduced, they sell the 70 vert repro quarters as 70 coupe quarters (which is not the same).
-
Mike65 reacted to a post in a topic: Reverse light and Neutral Safety Switch
-
Reverse light and Neutral Safety Switch
aslanefe replied to Vicfreg's topic in 1969-70 Technical Forum
As far as I remember, you can install "that switch" without removing the shifter lever. -
Reverse light and Neutral Safety Switch
aslanefe replied to Vicfreg's topic in 1969-70 Technical Forum
That is why I said "that switch" :) -
Reverse light and Neutral Safety Switch
aslanefe replied to Vicfreg's topic in 1969-70 Technical Forum
https://bcbroncos.com/shop/drivetrain/auto-trans/21-52041-c4-neutral-safety-switch/ See the photo at the link above for location of that switch. -
Reverse light and Neutral Safety Switch
aslanefe replied to Vicfreg's topic in 1969-70 Technical Forum
You do not need to remove the shift handle to install that switch, it is installed on the transmission over the shift shaft. -
Sorry to hear about Annie and Suzy.
-
RPM reacted to a post in a topic: Bandwidth issue
-
Eventhough February is already short; with this many spam posts, looks like it is going to be a real short month this time.
-
det0326 reacted to a post in a topic: Carpet Install
-
Do these scammers post via hacking without an admin approval to be a member?