jerr_man

I sure was! It was on display at the Keystone/LKQ booth

I had the hood done to use as a display for my company to use at a local car show " World of Wheels" in our booth. We were displaying the Dupont Cromax Pro and Dupont clear as well we used the Keystone Hotrod Black which does not mark up and hand prints can be easily wiped off with a detail spray and not burnish. Now waiting for the shop to make room to finish painting the rest of the car.

I went with the magna flow stainless 2.5" kit running long tube headers. Had to get creative going up through the tunnel over the bottom plate. Welded a 1" square tube to give me the extra room and is all tucked in nice. Sounds great I think and cant wait to open it up legally. Lol

Beautiful :thumbup1::thumbup1::thumbup1::thumbup1:

Hello Latoracing, if you still have the original seat risers measure the height where the seats bolts too. I had installed the one piece in my 70 vert and after putting the seat in noticed that i only had 2 inches between the steering wheel and seat. I have since put the individual seat risers in and have way more room between the steering wheel and seat.my car originally had the individual seat risers, it was quite the conversation with the local mustang shop but after emailing them 20 or so convertible pics with single seat risers they admitted they may not know everything...lol

if i remember correctly i did some relief cuts in the center top and bottom. I think it looks correct for fit. My original was shot.

2003 Mach 1 rims, will put new tires on once it is painted 17x9

Looks great !!!

Starting to look like a car again

I like the 69 split bumper look...lol

I have looked and looked and cant seam to find a definitive answer. I just picked these up 17x9 245 45 r17. the fronts im assuming i would need a minimum of 1.25 but how about the rear? stock front suspension front disks and rear drums. $280 for all 4 which i think was a good deal with rubber that needs changing...lol

I dont see any pics either..

seat pans are in, still have to clean up my welding.[ATTACH]10786[/ATTACH]

Hi Pakrat, the Dynacorn pieces have the brace under the pan,

The seat pans are Dynacorn, made in Taiwan.. there will for sure be some fab work to make them work. I am going to tackle the seat pans tomorrow and will let you know how it goes.

just got the seat pans FINALLY !!!! so I will play around with those maybe next weekend. also got the TMI seat covers and will take a stab at that too. Went and picked up my 3 colour choice panels and will mull that over the summer.

Looking good fellow canuck !!!!

+2 with BigDuke6 same problems with fit

70mstang, that is a really nice job it looks so clean. cant wait till i am at that point

70mstang, that is a really nice job it looks so clean. cant wait till i am at that point

Stangnet33, are you looking for highback or low back seats? I know of a guy outside of Calgary that is selling the seats from a wrecked 69 coupe. they are the low back. Within Canada Greyhound is best and cheapest I found.

Stangnet33, are you looking for highback or low back seats? I know of a guy outside of Calgary that is selling the seats from a wrecked 69 coupe. they are the low back. Within Canada Greyhound is best and cheapest I found.

PM'd you Rangerdoc

Hi Ron, Beautiful car !!

A buddy of mine in Vancouver bought a set of his OEM wheel well trim for his Grande. My friend said he is in Courtenay