Leaderboard
Popular Content
Showing content with the highest reputation on 04/14/2017 in all areas
-
1 point
Is This An Oil Passage Plug?
barnett468 reacted to Midlife for a post in a topic
Don't forget the muffler bearing grease temp sensor, and the windshield washer bottle fluid level gauge. What about a PCV vacuum gauge? Now that would be interesting... -
1 point
408 Hemi stroker
bosephus reacted to Ridge Runner for a post in a topic
Not sure about the wrinkles ,but i bet it could smooth out a wallet -
1 point
408 Hemi stroker
barnett468 reacted to Caseyrhe for a post in a topic
I'll pass, to many gauges needed -
1 pointI'm not so sure agreeing with Mike is a good thing. Who stopped at 6 gauges? The oil temp makes eight! With my auto trans I wanted a temp gauge for the fluid. The pod bezel for the center console front ash tray has two holes so the other hole "needed" the oil temp gauge. Now, they do sell hinge pillar trim pieces with gauge pods...Hmm....
-
1 point
Is This An Oil Passage Plug?
Mach1 Driver reacted to barnett468 for a post in a topic
Well if you really want to "Ban" me, I prefer you use some Sweet Surrender....but ya gotta take me to dinner first. -
1 point
Mach 1 resto in Australia
Ridge Runner reacted to MAC390 for a post in a topic
Well it's Good Friday down here and Easter holiday break. Put the 390 in with the C6 and the hooker super comps bolted up also. With my 15 yo daughter and my apprentice marine engineer helping me we got it in and bolted up in under 2hrs, that's a major step forward. Also put the carpets in so they can settle into the shape, the carpets are well made and a excellent fit. -
1 point
69 Rear Suspension
Harveycrymn reacted to barnett468 for a post in a topic
ok, you should run a separate air line to each shock if you keep the air shocks and they will still occasionally hit unless you increase the length of the bottoming rubbers. also, welding a thick fender washer to the top shock hole will virtually eliminate any possibly of cracking the body there . you can also put one on the bottom instead. -
1 point
69 front suspension
barnett468 reacted to Rsanter for a post in a topic
You do not need a fancy system for what you are using the car for. All you are buying is bling is the way it looks to me. if you use good quality components, lower the upper A arms , sway bar and add eibach variable rate coils you will be in good shape. Way under the $2500 mark basically i have my car set up similar to the Shelby R model and I have had it on the track at 143mph with no trouble bob -
1 pointThat's probably one of those things you'll have to buy the part and check the fit. I've done that more than once on my rig. If it doesn't work out of them back up for sale. Or for sell if you live in Bakersfield.