1969vert

my ceiling is 10.4" and yes I can stack one on top of another..just havent done it yet..

Built my drip rail patches from metal laying around..both my corners were gone...Now new happy metal.. no more water in the trunk...

for some reason the pic was deleated from the older sight.. so this is what we are talking about.. and why is my u tube link so big????

tranny and new gear in Sunday going to take it out for a spin if the law will allow... put a few miles on the gear before i beat it up...

I have done it to steel hoods...just used rivits ...then laid down about 4 layers of glass then a small layer of bondo to fill in.... never cracked had it on my car for 10 years..

forgot the pic

Got my car on the lift.. if I could get off graveyards the tranny will come out...going to take the 4.11 out and install a 3.5 rear gear also...getting ready for next years season of BRACKET RACING..Wo.Wo.

176" long with no ramps will fit in a 2 car garage.....most garages are 21' deep .. it is 9' and some change wide though..

6'11" is the post height... Got the short version so I can roll it out of the shop and do nasty jobs on the driveway..Wife permiting.. After the transmissions are done..was going to stack one mustang on top of another...see if I can get more room in the shop..I bought this from gregs smith equipment...2k cheapest one out there with all the accessorys..went and picked it up so didnt pay shipping..wheels drip pans jack tray...havent put a car on it yet.. Going to in a few days...got to move the whole shop around to get one car out..sure would be nice if the car had forward...damn front drum..Oh by the way it took me 3 days to get it together by myself and a engine hoist and car skates...found out who my friends are though..HA. HA.

New toy to help work on the cars..got 2 transmissions to do..this will help

housing :: 200 to 300 bucks 3 rd member with trac lock::::1000 Alloy axles::::200 1400 to 1500 so 1300 aint that bad if it all new stuff Do you really need a 9" for your vert???? your 8" will work fine..with a posi..

housing :: 200 to 300 bucks 3 rd member with trac lock::::1000 Alloy axles::::200 1400 to 1500 so 1300 aint that bad if it all new stuff Do you really need a 9" for your vert???? your 8" will work fine..with a posi..

you will be pleased with the 205,s ... Been running mine for a while..

you will be pleased with the 205,s ... Been running mine for a while..

Yes and no...your carrier could be a small bearing and the 31 spline might not slip in if it is a factory traction lock...or open carrier ...most after market carriers use the big bearing and can be 28 or 31 splinter.......housings ....will work also but.....small bearing will not except the big bearing carrier.....if you have the big bearing third member...3.06 bearing diameter and carrier you are good to go with 31 spline...hope this helps...might just pull it out and do some checking....and see if you need more stuff......by the way I run the small bearing housing in my car and it works fine...just stuffed it with 31 spline stuff...

First fix the manifold leak then try to tune the carb....

I would repair that in 3 pieces...just some tin snips and some metal....you need take off the rest of the top and look for more damage. ..some vinyl top cars need a whole roof...but that spot can be fixed if thats all it needs...

As long as you have 5 lug 8" axels and drums they will fit into a small bearing 9" housing..all the same 28 spline stuff...the 28 spline stuff is not that bad.. I beat up on that stuff for years under my car.. but when it went mostly track axels started twisting..slicks and nitrous..the 8" will work on the street but if you beat on it hard..it will break..street tires and spirited driving should give you years of use...

Welcome to the site...

Paint it up to you and what you want. My 69 vert was indian fire originally...( sorry pak ).... I wanted a color that popped and caught your eye..so colorado red for me.. I had a 70 that was dk bright aqua..car was just for resale..grabber blue for it..some loved it some hated it..plenty of complements though.. I do have a 70 fastback that was grabber green it will go back grabber green.. just a sexy color..ford must have had a good thing back in the day because they are using the same colors again on there late models..one of the hardest thing is choosing a color...what you plan on doing with the car and what you like should influence you on your color choice... its your car so make a statement and make it yours..one thing you can do is repaint it yourself...for me if I dont like it.. its just around 300 for me to respray...one thing I did on my convertible was spray mulitple colors on the car to help choose which shade I liked...

Paint it up to you and what you want. My 69 vert was indian fire originally...( sorry pak ).... I wanted a color that popped and caught your eye..so colorado red for me.. I had a 70 that was dk bright aqua..car was just for resale..grabber blue for it..some loved it some hated it..plenty of complements though.. I do have a 70 fastback that was grabber green it will go back grabber green.. just a sexy color..ford must have had a good thing back in the day because they are using the same colors again on there late models..one of the hardest thing is choosing a color...what you plan on doing with the car and what you like should influence you on your color choice... its your car so make a statement and make it yours..one thing you can do is repaint it yourself...for me if I dont like it.. its just around 300 for me to respray...one thing I did on my convertible was spray mulitple colors on the car to help choose which shade I liked...

I might have a few laying around

It looks like torch red or known as colorado red..on my convertible

Just a couple of pics from gatorfest car show...Mine was the only mustang there..lots of old trucks.. U tube link below : my car is 36 seconds in..

mine is welded in 3" after the collector... so I could drop the exhaust and weld it in.. No room in my headers for the o2 sensor..