Tain 63 Report post Posted March 15, 2017 My car is not getting power to the rear of the car. And I don't know what happen because it was working until I was putting some bolts back into the lower dash. So the light above in the cabin and the taillight don't get power. 14 SextKecy, papedVem, napedVem and 11 others reacted to this Quote Share this post Link to post Share on other sites
LoneWolf2U 136 Report post Posted March 15, 2017 Check your headlight switch connection, all lights your having problems with go thru it. Quote Share this post Link to post Share on other sites
det0326 179 Report post Posted March 15, 2017 Pulled 1 or both 3 prong connectors loose under lower dash (driver's side? Quote Share this post Link to post Share on other sites
Tain 63 Report post Posted March 15, 2017 Also turn signals don't work Quote Share this post Link to post Share on other sites
Tain 63 Report post Posted March 15, 2017 My aftermarket oil and water gauges are acting like my rear taillight bulbs but my tail light bulbs don't light up when I brake by the after market gauges do and they also turn on when I move the turn signal stalk it lights up. But I did get he overhead light working Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted March 16, 2017 Sounds like getting a refurbished harness from Richard or Randy at MidLife is in order. That's what I'd do, or did. Quote Share this post Link to post Share on other sites
Tain 63 Report post Posted March 16, 2017 I think it is the headlight switch Quote Share this post Link to post Share on other sites
Tain 63 Report post Posted March 16, 2017 because the harness was working before Quote Share this post Link to post Share on other sites
Midlife 814 Report post Posted March 16, 2017 Sounds like getting a refurbished harness from Richard or Randy at MidLife is in order. That's what I'd do, or did. Just don't call me late for dinner. 1 RPM reacted to this Quote Share this post Link to post Share on other sites
det0326 179 Report post Posted March 16, 2017 Robert can fix it. Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted March 16, 2017 because the harness was working before Before what? Did you replace the headlight switch? Another reason not to end a sentence in a preposition :) Quote Share this post Link to post Share on other sites
Tain 63 Report post Posted March 16, 2017 It was worked before I but the bolts back into the lower dash, which is didn't take completely off. Also I have all the plugs in and replaced the blown fuses Quote Share this post Link to post Share on other sites
det0326 179 Report post Posted March 16, 2017 Blown fuses??? Which ones? Did you possible pinch a wire while bolting the dash? Quote Share this post Link to post Share on other sites
Tain 63 Report post Posted March 16, 2017 Blown fuses??? Which ones? Did you possible pinch a wire while bolting the dash?I blew the fuse for the rear taillight and the overhead light. It also a possibility I pinched a wire Quote Share this post Link to post Share on other sites
Guillaume69 150 Report post Posted March 16, 2017 Robert can fix that for you. LOL Quote Share this post Link to post Share on other sites
1969Fstback 58 Report post Posted March 16, 2017 Before what? Did you replace the headlight switch? Another reason not to end a sentence in a preposition :) Prepositions are mythical sentence components created by English teachers to justify their jobs. Quote Share this post Link to post Share on other sites
Midlife 814 Report post Posted March 17, 2017 I'm LOLMFAO or I should say Robert is LOLHFAO! 1 RPM reacted to this Quote Share this post Link to post Share on other sites
Caseyrhe 650 Report post Posted March 17, 2017 It's Randy! Quote Share this post Link to post Share on other sites
Tain 63 Report post Posted March 17, 2017 Who's randy? Quote Share this post Link to post Share on other sites
Tain 63 Report post Posted March 17, 2017 Any One have a wiring diagram for the under dash? Quote Share this post Link to post Share on other sites
Guillaume69 150 Report post Posted March 17, 2017 Who's randy? Now that's classic... ROTFLMAO!! It's a private joke. "Randy" happens to be Midlife's real first name. "Robert" has been mistakenly believed by some to be his first name for a couple weeks now. Which annoys him and make us laugh! Nothing more. G 8 RPM, unlinihada, SextKecy and 5 others reacted to this Quote Share this post Link to post Share on other sites
det0326 179 Report post Posted March 17, 2017 http://1969stang.com/forum/index.php?/topic/50415-no-reading-on-gas-gauge-what-to-do/?hl=%2Bfuel+%2Bgauge This is a diagram complimentary of Prayers1 I have used it lots of times. Scroll down to post 12 Quote Share this post Link to post Share on other sites
danno 128 Report post Posted March 17, 2017 We should post a set of schematics on this web site. I have a set with the mistakes corrected and made a little more easy to understand. I wonder if there is a way to post them here. They are not copyrighted , so I think it can be done. Quote Share this post Link to post Share on other sites
det0326 179 Report post Posted March 17, 2017 That would be very helpful to a lot of members here. Maybe RPM AKA Bob could help us with that. Quote Share this post Link to post Share on other sites
