rwcstang 201 Report post Posted January 28, 2018 I'd be interested, definitely getting tired of fuel spilling out when I fill up. Quote Share this post Link to post Share on other sites
stangs-R-me 120 Report post Posted January 28, 2018 Ok ... so far got 4 interested one being an Aussie. I will check with my local USPS to see what kind of hoops I have to jump through to ship to Australia as well as the cost. As many of you that are on this site, maybe a few could band together and I'd just ship ONE package over which could save some $$. If we can get 5 more commitments (9 total) I will order them up. Thanks, Doug 1 Shep69 reacted to this Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted January 28, 2018 I would be interested in one also. Quote Share this post Link to post Share on other sites
unilec 57 Report post Posted January 28, 2018 2 hours ago, stangs-R-me said: Ok ... so far got 4 interested one being an Aussie. I will check with my local USPS to see what kind of hoops I have to jump through to ship to Australia as well as the cost. As many of you that are on this site, maybe a few could band together and I'd just ship ONE package over which could save some $$. If we can get 5 more commitments (9 total) I will order them up. Thanks, Doug I am after two at this stage, so I have sent them an email to see if they will post to Australia. I see they have Paypal, which would suit me better. Quote Share this post Link to post Share on other sites
Shep69 149 Report post Posted January 28, 2018 Maybe start a new thread Doug. You may get some more interest. This one has been around for a while and people may not have opened it to see what you have done. mark Quote Share this post Link to post Share on other sites
stangs-R-me 120 Report post Posted January 28, 2018 14 minutes ago, Shep69 said: Maybe start a new thread Doug. You may get some more interest. This one has been around for a while and people may not have opened it to see what you have done. mark Yes, I'll likely do that eventually, but I'm already up to 7 requests so not bad for a little over 24 hours since my post. 17 minutes ago, unilec said: I am after two at this stage, so I have sent them an email to see if they will post to Australia. I see they have Paypal, which would suit me better. I notice you and Shep69 are both in Perth ... do you two know each other and could I send a compo shipment to just one of you ?? Doug Quote Share this post Link to post Share on other sites
Shep69 149 Report post Posted January 29, 2018 23 hours ago, stangs-R-me said: Yes, I'll likely do that eventually, but I'm already up to 7 requests so not bad for a little over 24 hours since my post. I notice you and Shep69 are both in Perth ... do you two know each other and could I send a compo shipment to just one of you ?? Doug Doug, I don’t know Unilec. I’m happy either way. Maybe get a couple of shipping prices , all together and seperate. Mark Quote Share this post Link to post Share on other sites
unilec 57 Report post Posted January 30, 2018 FWI, I have just received an email from filler neck supply and they do not post outside the USA, so back to square one. Im sorry Neil; our liability insurance will not allow us to do business overseas. Sales: Dustin Squires Filler Neck Supply Co. 10020 E Montgomery Ave Bldg #2 Spokane Valley Wa 99206 www.fillernecksupply.com Phone 888-239-8833 Quote Share this post Link to post Share on other sites
stangs-R-me 120 Report post Posted January 30, 2018 28 minutes ago, unilec said: FWI, I have just received an email from filler neck supply and they do not post outside the USA, so back to square one. Im sorry Neil; our liability insurance will not allow us to do business overseas. Sales: Dustin Squires Filler Neck Supply Co. 10020 E Montgomery Ave Bldg #2 Spokane Valley Wa 99206 www.fillernecksupply.com Phone 888-239-8833 So does this mean your not going to want two of the crimped down ones from me ?? Let me know, Doug Quote Share this post Link to post Share on other sites
Shep69 149 Report post Posted January 30, 2018 46 minutes ago, unilec said: FWI, I have just received an email from filler neck supply and they do not post outside the USA, so back to square one. Im sorry Neil; our liability insurance will not allow us to do business overseas. Sales: Dustin Squires Filler Neck Supply Co. 10020 E Montgomery Ave Bldg #2 Spokane Valley Wa 99206 www.fillernecksupply.com Phone 888-239-8833 Whats that about. Sounds like they won't stand behind their product. If anything this is a safety issue that im addressing . Im sick of getting fuel blowing out the tank onto my car while refuelling. I can't wait to get this mod done. Quote Share this post Link to post Share on other sites
unilec 57 Report post Posted January 30, 2018 3 hours ago, stangs-R-me said: So does this mean your not going to want two of the crimped down ones from me ?? Let me know, Doug Hi Doug, yeah I would be looking for two filler necks, but not crimped, just as they come from supplier. Quote Share this post Link to post Share on other sites
unilec 57 Report post Posted January 30, 2018 2 hours ago, Shep69 said: Whats that about. Sounds like they won't stand behind their product. No idea, first time I have come across this. Quote Share this post Link to post Share on other sites
MN69Grande 203 Report post Posted January 30, 2018 7 hours ago, unilec said: No idea, first time I have come across this. This is just a guess, but I would assume they have a lot of government compliance they have to go through selling primarily fuel related auto/industrial equipment parts vs niche hobby restoration parts. There is probably a lot of liability involved. My guess is they have had issues in the past or great concerns in this area; probably why they would have the type of insurance they do. Just a guess, but the US is a pretty litigious place. So since they probably aren't interested in entering the Austrian market they most likely just have a policy to turn down small purchase requests as the liability of getting sued is well beyond the small earnings potential. Especially if they haven't got through any compliance testing for foreign markets. 1 stangs-R-me reacted to this Quote Share this post Link to post Share on other sites
moodster 55 Report post Posted January 30, 2018 This looks like a good working solution and I am tired of spilling gas everywhere... please count me in, I'd like one. Thank you for all the hard work you've done to post this information and help everyone out. david Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted January 30, 2018 Count me in as well please. Quote Share this post Link to post Share on other sites
stangs-R-me 120 Report post Posted January 30, 2018 So far I've got 10 interested, but 3 are international shipments (1 for Shep69 & 2 for unilec) which are questionable whether or not I should get involved with now that I know the stance of the mfr. on their product used outside of the US market. here is the USA list: Mach1 Driver (1 insert) MN69Grande (1 insert) rwcstang (2 inserts) Mike65 (1 insert) moodster (1 insert) RPM (1 insert) Anyone I missed ?? Just need 2 more USA requests and I'll send everyone a PM with payment info to get the ball rolling. Thanks everyone, Doug Quote Share this post Link to post Share on other sites
Shep69 149 Report post Posted January 31, 2018 2 hours ago, stangs-R-me said: So far I've got 10 interested, but 3 are international shipments (1 for Shep69 & 2 for unilec) which are questionable whether or not I should get involved with now that I know the stance of the mfr. on their product used outside of the US market. here is the USA list: Mach1 Driver (1 insert) MN69Grande (1 insert) rwcstang (2 inserts) Mike65 (1 insert) moodster (1 insert) RPM (1 insert) Anyone I missed ?? Just need 2 more USA requests and I'll send everyone a PM with payment info to get the ball rolling. Thanks everyone, Doug Cmon Doug. Just send them over . It’s going on a US made car so what’s the issue. I’m gonna get one either way . 1 RPM reacted to this Quote Share this post Link to post Share on other sites
TexasEd 188 Report post Posted January 31, 2018 Me too if it wasn't obvious from my offer to donate an old neck for testing. Quote Share this post Link to post Share on other sites
stangs-R-me 120 Report post Posted January 31, 2018 8 hours ago, TexasEd said: Me too if it wasn't obvious from my offer to donate an old neck for testing. I've now added you to the list. After seeing the condition of my original 49 year old / 150k+ mile neck off the car and up close, I'm thinking this mod is best to do to a new neck since they can be found for less than $30. There was a little corrosion inside mine and the flange was somewhat tweaked ... I don't think this effected the cap's ability to seal though, but am still glad I used a new one for the mod. Per the PM I just got from Mark (Shep69), it does not sound like it is too big of a deal for me to ship parts down under as he has family in the states shipping car parts to him all the time. He and Neil (unilec) sound like they are OK with me combining their shipment and Mark said if I want to further distance myself from the transaction I could ship to his relation here in the US and they will forward onto him possibly with other car parts. I will contact everyone via PM within the next few days for payment info. ALSO ... If you buy more than ONE insert, I will pass along the postage savings and knock $5 off the price of each additional insert: 1st insert $29 shipped 1st Class USPS ... additional one(s) in same shipment $24 each. Thanks, Doug Quote Share this post Link to post Share on other sites
SM69Mach 68 Report post Posted January 31, 2018 If its not too late, can you add me to the list? Thanks Scott Quote Share this post Link to post Share on other sites
stangs-R-me 120 Report post Posted January 31, 2018 6 minutes ago, SM69Mach said: If its not too late, can you add me to the list? Thanks Scott Your now on there ... thanks, Those of you on the "LIST" make sure your mailbox is "not full" as I will be sending out payment PM's Thursday or early Friday so I can get order into fillernecksupply Friday afternoon. Doug Quote Share this post Link to post Share on other sites
stangs-R-me 120 Report post Posted January 31, 2018 Not being at all familiar with 71-73 Mustangs, I did not list them as possible candidates for this mod. Well, just saw a replacement '71-73 neck on CJP and on the one side profile picture they have it appears that there is some sort of insert inside the tube from the bottom already. Did some searching and found a used one on ebay with multiple pics and it is a "U" shaped piece welded inside that goes about 2/3 of the way up the neck that you can see down it inside the top opening. So this insert mod is definitely NOT an option for '71-73. Doug Quote Share this post Link to post Share on other sites
stangs-R-me 120 Report post Posted February 1, 2018 UPDATE: Just heard from fillernecksupply and was told their inventory must have been off as they currently have NONE in stock. So my 16 pc. order just switched to "pending". They do have 2000 pc. on order and they will let me know when they have an ETA. The 3 of you that sent me PayPal already do you want me to refund, or just sit on it ?? Thanks, Doug Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted February 1, 2018 Doug, hold on to it for now, we will see how long it takes to get them & go from there. Quote Share this post Link to post Share on other sites
SM69Mach 68 Report post Posted February 1, 2018 Just hang on to mine as well. Will just get one when they come in. Quote Share this post Link to post Share on other sites