mustangstofear

Thanks, we will be installing our Watts link soon, which welds to our full subframe.

Your eyes must be getting as bad as mine LOL https://shop.mustangstofear.com/index.php?main_page=product_info&cPath=5_31_521&products_id=559&zenid=qgvti7id8a9lq28vce5iopj5q6

Probably will need to take the hood off .

Both ends are welded on . The 65 -68 are made in a press and just flattened out . That takes a huge press to do that

These are on our website now. If our manufacturer would have given us a quote on the cost before running them, we probably wouldn't have made them. They are hand made and tig welded, plus made in the good ol' USA. We are actually selling them at cost. I'm sure sooner or later Scott Drake will make them for half the cost. https://shop.mustangstofear.com/index.php?main_page=product_info&cPath=5_31_521&products_id=559&zenid=qgvti7id8a9lq28vce5iopj5q6

Not sure how I have it reversed. We use the high pivot point on every pedal assembly we build with a manual M/C. We never use a power booster.

The manual brake pedal has a higher pivot point compared to the power which is a lot lower on the pedal. We only use the manual pedal for all our brakes.

Nice to see you're back on it :)

Depends if was for manual or power brakes.

You're going to find all kinds of so called experts that think they know it all. I get a chuckle out of the clowns that think their suspension experts LOL.

Ford did the galvanized on the outside so you wouldn't see it rust, they weren't concerned with the inner.

It's a beautiful piece, thank you very much :)

I think on the 3 A/C vents we will just shoot them all black since the chrome isn't perfect.

We did the inner rockers on a 67 fastback that we just shipped to BC Canada Sunday morning. It has a supercharged Coyote pulling 626 HP. We have plenty of pictures on our MTF forum.

The only time to record is if you want all the original on the tanks. We make a very nice 2 row radiator with 1 1/4 tubes. We can sell it without the fans .

So it's a single din with a flip up screen ?

Hard to believe anyone still does that with all EPA regulations. We use to do it for over 50 years.

Where did you get the double din bezel at ?

The car really turned out nice. Is that a Steel rear bumper ? The fit looks to good to be stock.

That's considerably wider than a Mustang if you didn't tub it.

Correct.

Let's see which way you have the buckle.

You will appreciate working with the OEM sheetmetal.