Leaderboard
Popular Content
Showing content with the highest reputation on 11/06/2018 in all areas
-
2 points
My Son Mike's 69 Mach 1 Restoration
Ridge Runner and one other reacted to RobotMan for a post in a topic
Disassembled back area and got all parts coated with rust inhibitor. Time to put back together. -
1 point
Show off your home brew tools!
Mach1 Driver reacted to Ridge Runner for a post in a topic
A couple more ,a fixture to assemble front clips . And added hydraulics and a rolling portable cart to my tubing bender for making roll bars -
1 point
Show off your home brew tools!
Ridge Runner reacted to RPM for a post in a topic
Just a few of many. -
1 point
Show off your home brew tools!
SWPruett reacted to Ridge Runner for a post in a topic
Drip rail molding removal tool -
1 point
1970 Fastback
RPM reacted to Cantedvalve for a post in a topic
So I built a sheet metal bender. It got the job done, but needs some upgrades to be more stout. Anyway, I used some cardboard to make a template... Here is the template pulled from the car, flipped over to show the "flat" view of what I have to cut out. Next, cutting and bending. -
1 point
Ride Height too high with my setup
RPM reacted to barnett468 for a post in a topic
you need to use lighter springs on the front if you want it to sit much lower in front. if you are out of spring adjustment on the rear and you want it lower, you need to use lighter springs there also.