IDIDIT tilt steering

[po51 21]

Anybody have experience with their tilt steering column? Thinking of getting one to make it easier to get in and out of my stang.

[BuckeyeDemon 211]

i'm putting one in my falcon.  It's probably very similar to the one for a 69.  It's pretty basic though.

 

[SM69Mach 68]

I used one when I put in my power steering. Nice piece and it give me a little more leg room in the car.

[mustangstofear 608]

It's the only brand we sell and install. We're actually making billet column brackets for them, and should be done next week.

[J's69Mach1 17]

Just wondering Does this steering column still use the stock turn signal switch that came in our cars?

[BuckeyeDemon 211]

Just wondering Does this steering column still use the stock turn signal switch that came in our cars?

mine came with one already installed.

[cavboy78 28]

it would be great if they came out with a column that works for a '70 and works with the burgeon box... I'd buy it in a second...rant off.

[po51 21]

I have a question for Mustangstofear sent you a PM My question is I've heard is that you can damage the turn signal switch on the column if you use a after market steering wheel? Anybody have info on this?

[stangman69 17]

I put one in my 69 coupe. Replaced the rag joint with a u joint and put a LeCara wheel on it. Ran it into a Flaming River box.

 

Not on the road yet but it went together fine and should tighten up the steering a good bit.

 

I think I have a picture in my garage.

 

Nate