Floridastang 13 Report post Posted September 15, 2015 I am looking to install 3 point seat belts in the front of my 69 Fastback. It was originally equipped with a shoulder belt but not of the retractor variety. I am looking for a bolt in retrofit not a fabrication project. Any help would be appreciated. Quote Share this post Link to post Share on other sites
Flanders 47 Report post Posted September 15, 2015 all ye answers be here! http://1969stang.com/forum/index.php?/topic/54016-3-point-retractable-seat-belts/?hl=%2Bseat+%2Bbelt Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted September 16, 2015 Yep, I also used Wesco. Quote Share this post Link to post Share on other sites
69volunteer 84 Report post Posted September 16, 2015 +1 Pretty simple install. The only dislike I have is that with a center console, the buckle on the trans tunnel is a little hard to get to. Quote Share this post Link to post Share on other sites
danno 128 Report post Posted September 17, 2015 If you are ambitious, you can grab one from a salvage yard. Look at some of my other posts, I have pictures of what I used. It was the system from a 1985 Ford, works perfect and cost me a total of $10. Quote Share this post Link to post Share on other sites
JD08 42 Report post Posted September 18, 2015 I used the 3 point set from NPD. I used original style hardware rather than the stuff that came with them. It really was a quick and easy install. Quote Share this post Link to post Share on other sites
1969_Mach1 333 Report post Posted September 19, 2015 Scott Drake offers 3 pt. kits that use buckles that mimic the originals for 1969. One place that carries them is Summit Racing. I will add, I tried installing 3 pt. seat belts in my Mach 1. The larger retractor assembly prevents the front seats from moving to the full rearward position. I'm only 5'-10" and I need the seat all the way back for leg room so the 3 pt. seat belts would not work. I didn't want to try to relocate the retractor so I reinstalled the original seat belts. Plus these 3 pt. retractable belts install a bit odd. The retractor assembly and the lower fixed mounting point share the same mounting bolt unlike any car that comes with 3 pt. retractable seat belts from the factory. Also the buckle end doesn't fit right if you have a factory console. NOT MY THUMBNAIL Quote Share this post Link to post Share on other sites
Dave R. 85 Report post Posted September 19, 2015 I used belts from Juliano's Hot Rod parts. Retractors on the front and non-retractors for the rear. Easy bolt in and there is pictures somewhere on their site showing install steps for a '70 sportsroof. Dave R. Quote Share this post Link to post Share on other sites