mustangstofear

Here is what we've been working on.
 
 

If you installed TMI seat foam, they are going to raise you up a lot. You can install one of our headlines and gain around 3 inches. 

The best advice I can give you is to stay away from the 3 inch exhaust. For some unknown reason people think running a 3 inch on a mild build will increase their HP, when actually it's the opposite. Go with the 2 1/2 and you won't have any clearance issues.

Go with the PPG Epoxy, their sealer is used right before your ready to lay down your base coat.

Just a heads up, Since I also make the sail panels for our headliner, I found out there is a big difference between the original and the aftermarket lights. We just have a dimple where the light goes and let the customer cut out the size he needs.

We are getting closer. I was promised we would have one before Thanksgiving , then it was Christmas LOL. He's working on it full time now, he was just finishing up our new 67-68 gauge cluster.

Now you need to ask Safelite in advance how they plan to install it. Originally they were installed with butyl ,thats why your came out so easy. It would do the same thing if you were in an accident, that's why I install them with modern urethane.

WOW, it turned out really clean.

That blue car is just WRONG.