MAC390 327 Report post Posted October 26, 2017 Those supports are real nice,what's their strength rating. Quote Share this post Link to post Share on other sites
Footcutter11 23 Report post Posted October 26, 2017 Thanks! Tensile 4.826 GPa, Compression 227 GPa. Quote Share this post Link to post Share on other sites
Silver_69_Coupe 31 Report post Posted October 27, 2017 Very Nice... I am going to have to upgrade my shock tower braces to that. The center console and door trim on my interior is getting this stuff. 400 × 300 - compositeenvisions.com Quote Share this post Link to post Share on other sites
unilec 57 Report post Posted October 27, 2017 Nice panel work, so are you using the original hood or will that need to be modified? Quote Share this post Link to post Share on other sites
Footcutter11 23 Report post Posted October 27, 2017 9 hours ago, Silver_69_Coupe said: Very Nice... I am going to have to upgrade my shock tower braces to that. The center console and door trim on my interior is getting this stuff. 400 × 300 - compositeenvisions.com I get mine from Dragon plate. They have red and blue, and kevlar wrapped CF. I am going to check your guys out for the interior. Quote Share this post Link to post Share on other sites
Footcutter11 23 Report post Posted October 27, 2017 8 hours ago, unilec said: Nice panel work, so are you using the original hood or will that need to be modified? Thank you.I got a Dynacorn original hood. I am going to keep all the original lines, and even remove the side scoops behind the door. The custom touches will be the sun roof, rear wing, front spoiler, rear air dam, and side skirts. The goal it to keep the lines nice and clean, with a few subtle details. I may put the bolt on mach1 scoop on. Quote Share this post Link to post Share on other sites
Footcutter11 23 Report post Posted October 28, 2017 Little more progress. Firewall time. Quote Share this post Link to post Share on other sites
Ash 145 Report post Posted October 29, 2017 Very impressive. I love it. 1 Footcutter11 reacted to this Quote Share this post Link to post Share on other sites
Footcutter11 23 Report post Posted October 29, 2017 24 minutes ago, Ash said: Very impressive. I love it. Thank you! Having fun. Quote Share this post Link to post Share on other sites
Footcutter11 23 Report post Posted November 8, 2017 Flush door handle prototype. Quote Share this post Link to post Share on other sites
bigmal 225 Report post Posted November 9, 2017 That’s some real artistry. Wish I had those skills. 1 Footcutter11 reacted to this Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted November 9, 2017 Hey, Paul Harvey, we need the rest of the story. So you made the door handles and mechanisms from scratch? 1 Footcutter11 reacted to this Quote Share this post Link to post Share on other sites
MAC390 327 Report post Posted November 9, 2017 Wow that is sensational work, real skills there. 1 Footcutter11 reacted to this Quote Share this post Link to post Share on other sites
Footcutter11 23 Report post Posted November 9, 2017 11 hours ago, RPM said: Hey, Paul Harvey, we need the rest of the story. So you made the door handles and mechanisms from scratch? Yes. Have not decided on mechanical or electrical actuation, but I can do either. The mechanical will be in the form of a bicycle cable, electrical will be in the form of a momentary switch. Electrical seems the best option, since it requires the least amount of force. I saw that to buy them was $600-800 for a pair, which is ridiculous when it only takes $30 in materials, and I like making shit. :) Quote Share this post Link to post Share on other sites
Footcutter11 23 Report post Posted November 9, 2017 Here it is open with the spring out. Still need to make sure I get door glass clearance. Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted November 9, 2017 Holy crap, that is some outstanding talent you have FC! Very impressive indeed. The level of skills of you guys on this forum just floors me. Quote Share this post Link to post Share on other sites
Footcutter11 23 Report post Posted November 9, 2017 9 minutes ago, RPM said: Holy crap, that is some outstanding talent you have FC! Very impressive indeed. The level of skills of you guys on this forum just floors me. Well, thanks. There is a lot of trial and error that you may not see.... :) Quote Share this post Link to post Share on other sites
JET 445 43 Report post Posted November 10, 2017 So now you are making custom door handles, I would of thought making a custom chassis was enough. Suddenly I feel very lazy. Quote Share this post Link to post Share on other sites
Silver_69_Coupe 31 Report post Posted November 10, 2017 If you want to go the electric route here is what I did. I used a keyless entry kit and some door lock actuators from a early 90's Silverado. Then built brackets that hooked them into my door latch. I think the whole setup cost about 50. They work quite well. 1 Footcutter11 reacted to this Quote Share this post Link to post Share on other sites
Footcutter11 23 Report post Posted November 10, 2017 7 hours ago, Silver_69_Coupe said: If you want to go the electric route here is what I did. I used a keyless entry kit and some door lock actuators from a early 90's Silverado. Then built brackets that hooked them into my door latch. I think the whole setup cost about 50. They work quite well. I have a keyless entry system, and 3 extra actuators (maybe trunk). Electric is the direction I am going. Thanks for the tip! :) Quote Share this post Link to post Share on other sites
Footcutter11 23 Report post Posted November 10, 2017 12 hours ago, JET 445 said: So now you are making custom door handles, I would of thought making a custom chassis was enough. Suddenly I feel very lazy. Don't. I just can't see paying $800 of hard earned cash on Fin door handles.... Quote Share this post Link to post Share on other sites
Footcutter11 23 Report post Posted November 11, 2017 More mock up. Quote Share this post Link to post Share on other sites
MAC390 327 Report post Posted November 12, 2017 Nice plumbing, how much hp are you looking for. Again very clever work. 1 Footcutter11 reacted to this Quote Share this post Link to post Share on other sites
Footcutter11 23 Report post Posted November 12, 2017 1 hour ago, MAC390 said: Nice plumbing, how much hp are you looking for. Again very clever work. Thanks. 800HP. Quote Share this post Link to post Share on other sites
MAC390 327 Report post Posted November 12, 2017 Nice!!!!!, my kind of HP 1 Footcutter11 reacted to this Quote Share this post Link to post Share on other sites