RandyBob

love the color lol I am just waiting on the gold side stripe

love the color lol I am just waiting on the gold side stripe

I considered that placement also the kit also comes with mounting pods that sit on the bottom of the dash by drivers right leg and pass left leg I personally didn't like them I felt they were alittle to flimsy.  you might not need to fab anything the kit came with a front plate and a backing plate they really wanted me to cut out the complete dash a large rectangle but I had a dash pad that acted like the faceplate.  Later on I might swap out the dash for an AC dash and use an OEM style register.  I choose the vintage air because talking with a few guys in my local club that did these installs before and a few shops they recommend it for its complete kit and easier read instructions.  Plus the price I got was a big factor.  If i were to use the radio area And put a double din in the center dash I would use something like a 2 in gauge pod and mount the registers in them on the bottom center of the dash, old radio area I would mount gauges.  I'm going to tell you when you go to cut the dash in the middle be prepared for thick metal under all the foam right at the curve of the dash.  If its a non ac car the area where the OEM register is filled in with foam around it is steel plate.  good luck like to see pics when your done.

looking for a mach 1 clock for parts or complete. mostly just need the set gear and spring   thanks 

looking for a mach 1 clock for parts or complete. mostly just need the set gear and spring   thanks 

looking for a mach 1 clock for parts or complete. mostly just need the set gear and spring   thanks 

looking for a mach 1 clock for parts or complete. mostly just need the set gear and spring   thanks 

looking for a mach 1 clock for parts or complete. mostly just need the set gear and spring   thanks 

looking for a mach 1 clock for parts or complete. mostly just need the set gear and spring   thanks 

looking for a mach 1 clock for parts or complete. mostly just need the set gear and spring   thanks 

looking for a mach 1 clock for parts or complete. mostly just need the set gear and spring   thanks 

looking for a mach 1 clock for parts or complete. mostly just need the set gear and spring   thanks 

looking for a mach 1 clock for parts or complete. mostly just need the set gear and spring   thanks 

looking for a mach 1 clock for parts or complete. mostly just need the set gear and spring   thanks 

looking for a mach 1 clock for parts or complete. mostly just need the set gear and spring   thanks 

looking for a mach 1 clock for parts or complete. mostly just need the set gear and spring   thanks 

looking for a mach 1 clock for parts or complete. mostly just need the set gear and spring   thanks 

looking for a mach 1 clock for parts or complete. mostly just need the set gear and spring   thanks 

Very nice!

Thanks guys here is a better picture 

Thanks guys here is a better picture 

Thanks guys here is a better picture 

ok folks just wanted to share with you today This is for the ones taking years to finsh their mustangs I started mine in 2003. its all but done as of yesterday. I want to thank you all for your help and ridgerunner for the parts.
here are some pics
 
 the car is all but done just need to fine tune a couple of things My due date was to be april 22 I missed it by a day. the car was built on april 22 1969.took a ride out to pebble beach and took some pictures at the same spot I took pictures when I bought the car april. 1983.So 33 years later here is the same car at the same spot.
never give up and just enjoy the journey
the car is a mach1 428 cobrajet  4speed