jjstang 51 Report post Posted November 18, 2016 This part is labeled for '65. will it work on the 69 3 Zefevinee, Gansalbut and JoycebuIcs reacted to this Quote Share this post Link to post Share on other sites
Ridge Runner 1,114 Report post Posted November 18, 2016 Frame rails are all the same except for a few holes for the 67 up ,it should fit . Quote Share this post Link to post Share on other sites
Mike65 476 Report post Posted November 19, 2016 Yes it should, I used the same patch on both of the frame rails on my 69 Coupe. I had to repair both of the spots where the front floor extensions overlap the frame & I used that piece. The pics below are on my l/s frame rail. The only thing you need to do is cut it at the bottom bend & make it a little narrower & then re weld it as the repair piece is slightly wider then the actual frame rail. Quote Share this post Link to post Share on other sites
MAC390 327 Report post Posted November 19, 2016 Yes, i used these also and i just cut them to suit and welded them in. Quote Share this post Link to post Share on other sites
prayers1 153 Report post Posted November 19, 2016 What thickness is the frame rail in case someone wanted to buy a piece of metal for repair? Quote Share this post Link to post Share on other sites
Mike65 476 Report post Posted November 19, 2016 I measured a piece of the outer section of a repo frame rail & it measured 1/8" thick. Quote Share this post Link to post Share on other sites
stangnet33 88 Report post Posted November 19, 2016 I believe mine is approx 12 g Quote Share this post Link to post Share on other sites
