mustangstofear

We lost the upper scoop inserts, plus since there not completely flat they would have to be CNC out of billet. This could very expensive.

All we've ever used are BBK offroad.

That's the norm. My brother is working on a 1965 Chrysler without air and has tinted glass. Everyone says only the air cars had tinted glass

Anything ? I'm getting desperate LOL.

When you're working with all aftermarket sheetmetal you can figure on that.

I thought about making matching ones like we did for our new 69 hood out of Stainless steel, but I would still need a pattern to make them.

Yeah, but since I don't have any in my hands, I thought they were ABS. Yes, those are what I need :)

Looking for the black plastic inserts that go in the upper Qtr panels scoops.

Did 1 coat of clear. Monday we will lay the stripes down and the Mustangs To Fear decal plus 3 more coats of clear.

The front fenders are a stencil, but the rest of the stripes were hand laid. For the hoid we will be using a black decal.

I'll take the one you have :) if you have s box we can send a call tag. Email me at hotrodmtf@gmail.com. thanks.

It wouldn't make any difference , I can cut the holes for the A/C.

That would be correct :)

You really have to see this color up close to appreciate it.

Looking for a really nice lower dash if anyone has one. Call 877 899 9021.

Dynacorn would be better off to let the customer weld the rear bumper brackets on. They never line up

We did 3 more coats of clear and now these panels are done.

You should be able to you the holes you already have. You mark the bottom side of the door where the holes are then line up the door panel. You can probably use a scratch awl to fi d the holes. We will be do the same thing shortly on Craig's.

In case you're wondering, that's the sunlight coming through our overhead door. This color will change depending on angle and light.