Vicfreg 773 Report post Posted February 15, 2018 Will be posting pictures shortly.... Starting to liquidate my “extra” parts. I am going to list them below and include pictures. None of this is junk, and these are all original parts that came off of my own car (1970 convertible) or a couple parts cars from Nevada. Nearly all of the metal parts have been media blasted, primed, and coated with black epoxy to preserve them. . Prices do not include shipping, typically, unless it is a really heavy, or really big part, assume about 10% for shipping. If you want any more details on the part, send me a PM. I tried to take pictures that show any date codes or part numbers that appear. I can take more pictures if needed. All are sold as-is. If you are not happy with the part, you can send it back and I will refund your money. For the parts that I think are close to original condition, or in excellent condition, I have put an “A+” next to the part. PayPal works the best for me, and I will ship as soon as I can get to it. If you are really in a rush, I can get it there quicker, but the shipping will cost more. I also have about the same amount of parts in my storage building that I will be listing in a few weeks. If you want all of it, let me know, and you can drive to the Charlotte NC area and load up..... 1. Light Teak Deluxe Clock Dash - $100 2. Dark Teak Deluxe Clock Delete Dash [A] - $175 3. Upper shock mounts – [A+] $40 4. Rear bumper brackets - $35 5. Front side marker light brackets (1970) [A+] - $40 6. Manual brake pedal for Automatic Transmission Cars (1970) with original mounting hardware and bushings - $150 7. Air Conditioning Firewall Access Plates [A+] - $100 8. Power Steering Pittman Arm [A+]- $75 9. *********** Deleted********** 10. Air Conditioning Control Panel face - $10 11. 2 Horns – One Low tone, One High tone - $50 12. C6 transmission cross member, correct 351 X markings - $150 13. FMX Transmission cross member (dimensionally identical to the C-6) [A+]- $125 14. Shock tower braces [A+] - $75 15. Outer coil spring covers [A+] - $150 16. Radiator Brackets (24” radiator) - $20 17. Original Steering Box Bolts with "D" washers - $15 18. Original 351 W Distributor Hold Down with hardware - $5 Items that require a little more description: 19. Wheel covers. These are off of a 1969 Mustang Grande, and have been in storage since 1972. They have the correct non-Mustang hub, and the red Mustang center emblem. These were supplied by Ford from 1967 to 1969. There are some minor scrapes on these, but they are really, really nice original condition Stainless Steel wheel covers. The repro’s are not anywhere as good as these. - $400 20. 1970 Mach 1 grill with sport lamps. This is an original grill that has no damage or broke tabs. It was cleaned and detailed by hand, and painted the correct color (NPD grill paint). It is in “A” condition. The sport lamps are in “B” condition, mostly because of the outside of the housings, which have some light pitting, but were media blasted and painted. The bezels are excellent, and the lenses are new. The brackets are A+ and have been media blasted and powder coated. I would rather not separate these parts and will sell them all together for $450. Stuff too big to list, or ship, local pickup only. I will send you pictures if you are interested... 21. 1970 Shaker Hood 22. 1970 Front Fenders 23. 1969 Mach I Front Seats 24. Late model AOD 25. Complete power steering front linkage including control valve 26. 1969 and 1970 Power brake boosters 27. 1969 and 1970 Power steering pumps Quote Share this post Link to post Share on other sites
Vicfreg 773 Report post Posted February 15, 2018 PM me with questions Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted February 16, 2018 I would really like to have the sport lamps if you decide to sell seperate Quote Share this post Link to post Share on other sites
Vicfreg 773 Report post Posted February 16, 2018 I have another set that need to be restored. I will go over to my storage bldg and find them, and take some pics 1 Ridge Runner reacted to this Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted February 16, 2018 I'll take the lower radiator brackets thank you. Quote Share this post Link to post Share on other sites
Vicfreg 773 Report post Posted February 16, 2018 Ok. At work now I’ll follow up with you little bit later Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted February 16, 2018 Work??? What's that? Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted February 16, 2018 Funny ,i always wondered what vacation was ! 1 RPM reacted to this Quote Share this post Link to post Share on other sites
Vicfreg 773 Report post Posted February 16, 2018 Radiator Brackets Sold Quote Share this post Link to post Share on other sites
shelbyshelby 52 Report post Posted February 17, 2018 Are the horns functional? Sound as they should? Quote Share this post Link to post Share on other sites
Vicfreg 773 Report post Posted February 17, 2018 I tried them before I cleaned and painted them, and they were great. I will give it a try again to make sure they are still working fine and let you know. Quote Share this post Link to post Share on other sites
Vicfreg 773 Report post Posted February 18, 2018 I have been asked to post the pictures of my fenders and shaker hood. The fenders are in good condition, they have been media blasted and coated with a metal preservative. The shaker hood is straight. The hood latch holes need to be repaired, as someone saw the need to enlarge the holes at some point in the car's life. The fenders are around $250 each new. The hood new is around $625. I want $750 for all of it. I will not ship it, unless you want to pay for crating and shipping. I am located in North Carolina, near Charlotte. I would be willing to bring these to the Carlisle Ford show in June, if you want to wait that long. Quote Share this post Link to post Share on other sites
machm1970 180 Report post Posted February 18, 2018 PM sent on the hood and fenders. Matt Quote Share this post Link to post Share on other sites
Bob & Sue 110 Report post Posted February 19, 2018 PM sent RPM beat me to the 24" rad brackets. Do you have an original factory air condenser? Quote Share this post Link to post Share on other sites
Vicfreg 773 Report post Posted February 19, 2018 #10 (A/C panel face) and #18 (distributor hold down) sold Quote Share this post Link to post Share on other sites
Vicfreg 773 Report post Posted February 19, 2018 I do not have a factory A/C condenser. Quote Share this post Link to post Share on other sites
Vicfreg 773 Report post Posted February 21, 2018 Horns Sold 1969 Seats Sold Hood and Fenders no longer available Quote Share this post Link to post Share on other sites
Vicfreg 773 Report post Posted February 27, 2018 More parts I am finding that are for sale: 1 1969 Brake Booster 1 1970 Brake Booster 1 Power Steering Pump 2 Power Steering Hydraulic Cylinders These are heavy, so if you want them, PM me with your offer and your zip code so I can estimate shipping. Quote Share this post Link to post Share on other sites
Vicfreg 773 Report post Posted March 12, 2018 Couple of other items from the "as-is" parts bin - Complete power steering rack from 1969 Mach 1. - Small block motor mounts - frame side - Parking lights - Better picture of the brake boosters Quote Share this post Link to post Share on other sites
Vicfreg 773 Report post Posted March 12, 2018 Oh, pedal support bracket in the picture with the boosters.... Quote Share this post Link to post Share on other sites
shelbyshelby 52 Report post Posted March 13, 2018 Do the parking lights have any rust pitting or loose sockets? Quote Share this post Link to post Share on other sites
Vicfreg 773 Report post Posted March 13, 2018 I will go over to my storage place tomorrow and take some more pics Quote Share this post Link to post Share on other sites
Vicfreg 773 Report post Posted March 16, 2018 Added some pics of the parking lights, they are in good shape nothing loose that I can tell Added another pic of the brake boosters Added new part, which is a small block T-5 bellhousing. It has been media blasted and is really nice. Quote Share this post Link to post Share on other sites
Vicfreg 773 Report post Posted May 12, 2018 Many items still for sale. I am headed to Ebay with these at the end of the summer..... Quote Share this post Link to post Share on other sites