Raven R code 281 Report post Posted October 19, 2017 Just want to confirm that a copper washer goes between the caliper and flexible brake line. Does that sound right? Quote Share this post Link to post Share on other sites
larryc94 38 Report post Posted October 19, 2017 Yes and one between the banjo bolt and the flexible brake line "block" 1 RPM reacted to this Quote Share this post Link to post Share on other sites
Raven R code 281 Report post Posted October 19, 2017 I haven't been able to find new flex lines with the banjo bolt into the caliper. Quote Share this post Link to post Share on other sites
69ShelbyGT350H 61 Report post Posted October 19, 2017 2 hours ago, Raven R code said: I haven't been able to find new flex lines with the banjo bolt into the caliper. These? https://www.npdlink.com/store/catalog/Mustang_Disc_Brake_Stock-350-2.html https://www.rockauto.com/en/catalog/ford,1969,mustang,5.8l+351cid+v8,1132401,brake+&+wheel+hub,hydraulic+hose,1792 Quote Share this post Link to post Share on other sites
Raven R code 281 Report post Posted October 19, 2017 2 hours ago, 69ShelbyGT350H said: These? https://www.npdlink.com/store/catalog/Mustang_Disc_Brake_Stock-350-2.html https://www.rockauto.com/en/catalog/ford,1969,mustang,5.8l+351cid+v8,1132401,brake+&+wheel+hub,hydraulic+hose,1792 I saw those. The banjo bolt end is correct but not sure about the end with the 2 hole bracket (not sure where the bracket mounts with the 2holes). Quote Share this post Link to post Share on other sites
Brian Conway 264 Report post Posted October 19, 2017 My 69. Brian Quote Share this post Link to post Share on other sites
Raven R code 281 Report post Posted October 19, 2017 This is what I have..... maybe I just need to remove my little bracket and replace with the other style hose? Quote Share this post Link to post Share on other sites
Kris 90 Report post Posted October 19, 2017 The bracket you have is for drum brakes and isn't needed if your going to disc. The disc brake bracket is attached to the hose. If your brake line is for drum brakes it has a different size fitting than the disc brake hose. You will either need to replace the hard line or fitting; or get an adapter. Quote Share this post Link to post Share on other sites
Raven R code 281 Report post Posted October 20, 2017 Ah!.....starting to make sense! Thanks! Quote Share this post Link to post Share on other sites
