alex 18 Report post Posted October 16, 2016 I put Red Stuff EBC brake pads on the front of my car a while ago. The passenger side pads fit snuggly in the calipers however the driver side outboard pad move around enough to rattle while driving. There is no hardware that holds the outboard brake pads in place. Has anyone had this issues and resolved it? 1 WilliamFug reacted to this Quote Share this post Link to post Share on other sites
LindenBruce 27 Report post Posted October 16, 2016 You need this kit I believe. B. http://www.rockauto.com/en/moreinfo.php?pk=308687&cc=1132434&jsn=475 Quote Share this post Link to post Share on other sites
larryc94 38 Report post Posted October 16, 2016 You need this kit I believe. B. http://www.rockauto.com/en/moreinfo.php?pk=308687&cc=1132434&jsn=475 Yes specifically the pins and clips that hold the outboard pad, missing them Quote Share this post Link to post Share on other sites
Brian Conway 264 Report post Posted October 16, 2016 Everything in the kit, LindenBrue post, is on this disc brake. The rubber booties go on the foremost bolt. Everything for anti rattle and anti clunk. The correct position for the bleeder valve is marked in white. Brian Quote Share this post Link to post Share on other sites
ashleesmach1 28 Report post Posted October 17, 2016 Yes the clips are missing from the front of the caliper Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted October 17, 2016 Easy there Paco. Quote Share this post Link to post Share on other sites
ashleesmach1 28 Report post Posted October 17, 2016 Easy there Paco. ok partner no problem. I just hate those friggin thumbnails that just pop up 1 RPM reacted to this Quote Share this post Link to post Share on other sites
MikeStang 247 Report post Posted October 17, 2016 Im having a rattle problem with my Granada Swap kit LOL. I have the anti rattle clips on the inner pads and have beat the pad ears in tight on the outer pads and put the anti rattle lube on the pads, but still around 60-150 mph or so I get a Buzzing sound that I know is coming from the pads LOL... Cant seem to make it stop :/ Any suggestions? Quote Share this post Link to post Share on other sites
Caseyrhe 650 Report post Posted October 17, 2016 Suggestion.....If it stops, just turn the radio up or uncap the headers, squeaks will go away, lol Missing the outer pins and clips Quote Share this post Link to post Share on other sites