Dangstang 14 Report post Posted July 17, 2016 Started the stang today for the first time in 5 years ,car had been completely dismantled and rebuilt including all power steering equipment .Watch video for something you probably have not seen before if so please let me know what the issue may be 1 ernaqe3 reacted to this Quote Share this post Link to post Share on other sites
Black_69_FB 49 Report post Posted July 17, 2016 Lines are switched at the PS cylinder / ram edited to add: I meant to say the control valve, brain fart Quote Share this post Link to post Share on other sites
Dangstang 14 Report post Posted July 17, 2016 Are you saying the lines from the control valve to the cylinder are switched or the lines from PS pump to control valve ? thanks Quote Share this post Link to post Share on other sites
Dangstang 14 Report post Posted July 17, 2016 Yea i see the two from the pump are different sizes must be the two to the cylinder Quote Share this post Link to post Share on other sites
Caseyrhe 650 Report post Posted July 17, 2016 See picture attached Quote Share this post Link to post Share on other sites
Dangstang 14 Report post Posted July 17, 2016 thanks guys lines reversed and alls good ,fricken thing almost ripped my thumb off Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted July 17, 2016 Yep it could break an arm if you have it through the wheel with the lines crossed .I have seen them swing hard to one side and stay and i have seen them bounce back and forth violently . Quote Share this post Link to post Share on other sites
MN69Grande 203 Report post Posted July 17, 2016 Same thing happened when we fired mine up for the first time after 10 years. In my case I needed to replace the control valve and rebuild the ram. Like Ridge Runner said threw the wheel back and forth. Quote Share this post Link to post Share on other sites
Rsmach1 71 Report post Posted July 17, 2016 Hate it when that happens. Quote Share this post Link to post Share on other sites
Vicfreg 773 Report post Posted July 19, 2016 Hoses are reversed. Quote Share this post Link to post Share on other sites