Regta 10 Report post Posted August 22, 2015 I put together the interior of what was a basket case on my 70 FB. The area near the top corner of each side of the (non fold down) back seat has a gap, but I can't find anywhere what is missing. Can someone tell me if there is a filler molding or something OR even better yet, may have what I need lying around..... Photo attached. Thanks in advance Quote Share this post Link to post Share on other sites
BuckeyeDemon 211 Report post Posted August 22, 2015 you're missing the small filler piece. I sold mine a few years ago. Quote Share this post Link to post Share on other sites
Regta 10 Report post Posted August 22, 2015 Any idea of it's official name and does anyone re-pop it? Quote Share this post Link to post Share on other sites
Wycked69 20 Report post Posted August 22, 2015 Sorry, No reproductions of this part. I don't know the technical term but I have always called it the rear seat corner trim Here's some on ebay http://www.ebay.com/itm/1969-1970-Mustang-Fastback-Non-Folddown-Rear-Seat-Corner-Trim-Moldings-/171899488375?hash=item2806020877&vxp=mtr Quote Share this post Link to post Share on other sites
Wycked69 20 Report post Posted August 22, 2015 And I have no idea where those thumbnails came from in my post above Quote Share this post Link to post Share on other sites
Floridastang 13 Report post Posted August 23, 2015 Ping Ridgerunner on this site. He may make these parts Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted August 23, 2015 not yet ,soon as i get some free time i will .I plan on a press mold so they will be correct both sides . Quote Share this post Link to post Share on other sites
Regta 10 Report post Posted August 23, 2015 Ridge Runner, please keep me in mind if you do make them. Until then, if anyone has a pair, please PM me Quote Share this post Link to post Share on other sites
det0326 179 Report post Posted August 23, 2015 I purchased a set of interior quarter trim pieces and got a set of the corner trim covers with the set. So somebody does make them but I have never seen them sold separately and I might add the whole set was junk. Dave Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted August 23, 2015 The piece is so small and delicate i may have to glue them to something just to make the molds .the set i have is very nice but may not survive the mold making .I hate to ruin a good set but when they are finished they will be as close to the original piece as possible .I have a couple of sets around here somewhere but finding them would not be easy. Quote Share this post Link to post Share on other sites