RPM 1,190 Report post Posted March 11, 2014 Was going thru my trim box to locate the hood molding to check its condition. Found two that look similar, one being about 1/2 inch thick and the other 3/4 inch thick. WTFresno? Are they both hood moldings of what? One has regular nuts, the other has acorn style nuts. I've had a few hoods around here. Any idears? Bob Quote Share this post Link to post Share on other sites
stangs-R-me 121 Report post Posted March 11, 2014 The thinner one is 1970 !! Doug Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted March 11, 2014 70 huh? Thanks. Well maybe the shaker hood I bought just might be a 70. Any issues I can expect? Where on the hood should I look for the part number? Bob Quote Share this post Link to post Share on other sites
Brian Conway 264 Report post Posted March 12, 2014 The hood trim on my 69 is the 3/4" version and acorn nuts. The shaker hood has no markings at least mine doesn't. The hood does have date stamps. Date locations are the blue taped areas; one low and in front of the steering wheel and the other opposite side up higher. Brian Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted March 12, 2014 Thanks Brian. Bob Quote Share this post Link to post Share on other sites
Kris 90 Report post Posted March 12, 2014 The thinner one may be the lower center grill molding. Its hard to tell from the picture. Quote Share this post Link to post Share on other sites
BuckeyeDemon 211 Report post Posted March 12, 2014 the thinner is the lower grille molding, the thicker is the hood molding. Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted March 12, 2014 That crossed my mind Kris and Buckeye when I was first looking at them. But I couldn't picture how the grill molding would fit. Thanks guys! Bob Quote Share this post Link to post Share on other sites
