rawlinss

didn't fit!! Had to use 90 degree boots and boots would not fit inside headers properly....

Sounds great. Good luck with the leak...

Looking sweeeet!! Great Job.

Looking Mean. Keep up the good work!!

Thinking of these..... http://www.kmjent.com/cart/product.php?productid=10875&cat=&page=1

Need Part numbers for Shorty Headers for a 302 engine with GT40P heads. Thanks for your help in advance... :thumbup1: Set I picked up does not fit!! Clearance issues with steering box and shock towers...

Couldn't find enough info to do the job. Went ahead and found a local retired auto glass installer. Coming to the house and charging $150 to install front and rear glass...

From a google search I think the correct spelling is Lumitronic.

:scared: Yes, Don't want your speedo bouncing up and down..

car looks awesome!!

Working on 1969 Coupe Soooo, My husband and I were attempting to install back glass in a coupe this evening. Major failure. Couldn't even hardly get it started. Working with a freshly painted car and new gasket. Anyone that can give some tips is deeply appreciated. questions... 1. Where do you put the rubber gasket to get started? -on glass -on car 2. Do you put in glass from... -through back seat area? -outside over trunk area? 3. How is the rope method done???

Like the way you are thinking outside the box. This is going to be one unique pony!!

Very nice. Looks great!!

Congrats on your win!!

:thumbup1: Fuel Lines look nice...

Very nice ride. Congrats!!

BRAVO!! Your Mustang looks great. Job well done!

Looks and Sounds Awesome!! Congratz!!:001_cool:

Turned out great. Good Job.

agreed.... Keep is simple stupid works. KISS

What fluids are you guys running?? Power steering fluid or transmission fluid?

Thanks Bruce.

Found this online today.... http://www.christonium.com/mustang/Adding_Electronic_Ignition__Pertronix_HEI_FlameThrower_Distributor

anyone have a diagram for spark plug hook up to HEI Distrubutor? Where does 1,2,3,4,5,6,7,8 plug wires go on the HEI Dist...? I have a 302 motor in a 1969 coupe :hammer::

351W Torque Spec. Fastener Type Torque Spec Main cap bolts 95-105 ft-lbs Connecting rod bolts 40-45 ft-lbs. Cylinder head bolts 90-100 ft-lbs. Rocker arms 17-23 ft-lbs. Intake manifold bolts 23-25 ft-lbs. Oil pump bolts 23-28 ft-lbs. Cam bolts 40-45 ft-lbs. Cam thrust plate bolts 8-10 ft-lbs. Harmonic damper bolt 70-90 ft-lbs. Flywheel / flex-plate bolts 75-85 ft-lbs. Pressure plate bolts 35 ft-lbs. Front cover bolts 12-15 ft-lbs. http://www.mainemustang.com/mustang-info/ford-engine-bolt-torque-chart