Black_69_FB

69 non-tach dash wiring harness. Used original that I bought for my mach 1. Ended up not needing it, only used it for reference on existing wiring. It will need wrapped. Have pics I can upload if needed. $100 + shipping OBO PM or reply here. Thanks.

Item has been SOLD

Subframe connectors are sold...

Used Weiand Xcelerator single plane intake for a square bore 4v carb on a 351c with 2v heads. Good low end for a single plane manifold. Was going to use for EFI but sold car. $100 + shipping

You have PM(s)...

Good luck, Rsmach. I got the itch too, sold mine also & picked up a 71 Road Runner to restore. It happens.

I'm at work right now. I'll try to find a box over the weekend & get that figured out early next week. I live in a small town, no UPS / FedEx outlets... Saturday's full up or I'd try then

That's a negatory on the glove box striker latch...

Hey all -- I have some left over / unused parts from my resto. No longer needed, starting another project, cleaning house. Got some dash panel pieces & gauge assembly parts. Not sure what to ask on these? Open to offers / suggestions, would prefer dash panels & gauges go as a lot. Pics: I also have some Global West tubular subframe connectors that I bought new but never installed- SOLD And lastly, here is a set of A-pillar trim for a fastback. These are reproduction pieces that never got used because I found a good set of originals. $50 obo + SH. Just PM me here if needed. Thanks for looking.

Nope I'm running a stock stroke Cleveland. Guess that makes me runt of the litter? lol

Moot point now... she gone. It was a yellow car, Boss motor/trans missing, in need of resto for 7500. Wasn't my car, just ran across it while looking for stuff I don't need & can't afford.

Let's say there's a 1971 Boss 351 resto project I ran across on CL that I'm not in a position to move on. Which there is. Should I post a link here, or is that verboten? I've debated whether to post the link or not. The car isn't mine, don't know the owner, haven't had any contact with them whatsoever. On one hand, I'd hate for someone to miss it if they were interested. On the other hand, if there's something not kosher about the deal, I'd hate to unknowingly facilitate someone getting ripped off.

lol -- I wish I was in that tax bracket. No, I just drove it out to the defunct airstrip outside the small town I live in & snapped some pics. This pony resides in a humble one-car stall. BTW, I googled your car, cool history! Not at all -- in fact, I'm stealing the pic, so we're even :)

Just think of all the 69 Chargers that are DOA because of the DoH...

Don't watch if you're squeamish about seeing what appears to be a 69 B2 being given the busines...

lol You are right to be deliberate in your thought process, as you are well in the danger zone of the "while-I'm-at-it's".

Have you considered notching the shock towers for clearance while they're accessible? When I was rebuilding my car, the thought of hacking on them horrified me, but now that it's been finished for a while I wish I would have done it.

Yes, good point... wasn't thinking about shrinkage. Well, maybe there's a repo that got damaged during install floating around out there. Lacking that, I would still take an old original just to fill the channel in the wheel. I've got the center inlay on the pad all reconditioned and maybe I could install the wheel with a Grant horn button in place of the center emblem and drive it like that while I figure out what I want to do about the actual wheel itself (older amateur resto, showing some wear). Anyway, appreciate the lookout.

Like the title says... if anyone has an old/non-working rimblow switch for a 69 they would let go cheap, I could use it for a test fit on my wheel. Probably be good for me to get a trial run in on something I can't ruin too.

Hoping you can answer a quick question for me... do you happen to know the part # for that horn button? Or do you think it is the same as this one? : http://www.cjponyparts.com/horn-button-black-euro-style-5-bolt-6-bolt/p/HBG56-V/ Looks the same, but the description says 3" diameter... that seems a bit large, but I'm not home where I can get a good look at the hole in the pad for reference.

This video is for a '70, but hopefully it helps:

Good luck, P1. We eagerly await...

I get what you're saying, and you aren't wrong. I'd be surprised If I make more than 425 or so... if that. I can't put it to the ground as is, why worry about making more? And yet, I do... lol. Well, to clarify -- I'd like what I have now, plus maybe a little more... just in a super mild stroker form that has better vacuum, lower idle, more off-idle response etc. But unless I hit the lottery, it ain't gonna be anytime soon. In the meanwhile, this will do nicely.

$ 199.95 opening bid http://www.ebay.com/itm/C9ZZ-15A000-A-NOS-1969-1970-MUSTANG-CLOCK-KIT-NEW-/361669826246#viTabs_0 $995 Buy It Now http://www.ebay.com/itm/NOS-1969-1970-FORD-MUSTANG-BOSS-302-CLOCK-PANEL-STD-INTERIOR-WORKING-CLOCK-/351701166903 How bad do you want it? Or, if you can live without the clock... http://www.cjponyparts.com/dash-bezel-without-clock-hole-passenger-side-1969-1970/p/DT11R/

YouTube! lol