CJC

Can you give me a ball park on shipping to 74432?

Looking for a passenger side window regulator for a 1970.

I sent you a PM

I have an OEM Daniel Carpenter hood peak molding for sale. Molding is brand new but has a minor imperfection on the bottom side. Once installed will be very hard to even notice. This would be good for a driver and above quality. I can send pictures upon request. Asking $50.00 plus shipping. That is half the price of a new one and is new other than the small blemish. Part has never been installed.

I have been using the Adam's product line for nearly a year. For the products I have used I am very impressed and will continue using their product line. 1. Glass cleaner/excellent no streaking 2. H20 gloss guard/amazing product to use after washing 3. Car wash soap 4. Interior detailer/leaves a nice clean finish/not greasy or glossy, nice matte finish 5. Metal polish #1, and #2 excellent for chrome and stainless steel Excellent customer service!!!

I cant remember for sure what glue I used but purchased it locally. Before I purchased I telephoned Daniel Carpenter who reproduces the lens and asked them what glue they used to attached the stainless trim and purchased the glue they recommended.

Try( RCCI Products) You can Google them and he sales a relay that uses existing wiring harness I believe

I am needing a detailed picture of the underside of the hood for a 69 Mach 1 on the front outer edge just behind where the molding attaches. Any help will be greatly appreciated. If several pictures are needed to show the total area that will work. Thanks in advance.

Curious if any members are close to the Nashville, Tennessee area.

I went with TMI as my seat upholstery, headliner, and door panels all match from the same vendor. My car has white interior. I don't think going with black there would be an issue with color matching. Very pleased with TMI.

Rick, I have seen them on Ebay listed as NOS in the $20.00-$30.00 range

what is everyone using for Mach 1 tape stripes? I see they are all over the place on pricing. Some our printed, some are over laid. All claim to be Ford licensed. Any help or direction on whats best and most accurate? Thanks in advance

I have the following parts for sale. New Daniel Carpenter rear window seal. 69/70 fastback $25.00. New Daniel Carpenter trunk seal. 69/70 fastback $10.00 . New Daniel Carpenter fender quarter panel extension seal 69/70 fastback $3.00 Original rear hockey stick and fixed rear seat trim parts. $15.00 New take off voltage regulator 55 amp rating. $15.00 Prices do not include shipping.

1 .NOS 69 Mach 1 gas cap in Ford box. $400.00 2. New Daniel Carpenter rear window seal 69/70 Fastback $25.00 3. New Daniel Carpenter trunk weather strip 69/70 $10.0 5. Voltage regulator converted to electronic 55 amp rating $15.00 6. Passenger side hockey stick molding $10.00 7. Rear seat passenger side trim for fixed seat $10.00 8. New Daniel Carpenter front fender extension seal $5.00 Prices do not include shipping. Will accept reasonable offers. Thanks

Distinctive Industries black headliner for 69/70 fastback brand new unopened. $30.00 shipped to lower 48 states (SOLD)

I have for sale a rear factory fiberglass interior panel for a fastback in very good condition. Asking $50.00 and buyer pay shipping.

NOS eye brow molding for passenger side. (SOLD) Asking $70.00 plus shipping

Does any one know if you have to remove the fender or fender extension to change or remove the eye brow molding that surrounds the inner head light on a 69 mustang?

Needing a fixed ac idler pulley for 69 Mach 1 with 351 Windsor motor. Any help?

Cant tell you how the pics got attached as they aren't even mine. Go figure modern technology

I purchased a clear silicone product from O'Rielys auto parts to attach mine. It is an automotive grade silicone and seems to be holding up fine. It is clear and I just wiped off any excess with lacquer thinner as I didn't spare any product while attaching. For removal in the future if needed using a heat gun to soften the silicone will allow for easy removal of the stainless steal strip.

Anybody have an opinion on the best repro door sill plates. I have seen Scott Drake, Carpenter, Dynacorn. Maybe they are all made by the same manufacturer. Whats your thoughts on fit, finish, and appearance. Thanks

NPD sells the correct color of white pre-mixed in a rattle can in the SEMS product line. I used this to refresh all the hard interior parts that were white from the factory. Turned out excellent.

Bought both sides to convert to bolt in. Very nice glass, driver side was out of stock when ordered they shipped it later and arrived in a thousand pieces. Called them and they sent another one no questions asked. Some of the Mustang vendors sale the same glass they purchase fromAuto City.

They are available through NPD, Kentucky Mustang. Most vendors will have them.