aslanefe 333 Report post Posted July 26, 2017 I would remove the rivets and the piece that is held with them first. Grind the back sides of the rivets down, push them out with a punch. Fnd out what is hiding under that patch, then go from there. If you need to change the quarter, when you remove the old one you will have better access to the back side of the pillar and might be able to fix the pillar instead of replacing it. Quote Share this post Link to post Share on other sites
Tain 63 Report post Posted July 26, 2017 3 hours ago, Mike65 said: Dynacorn sells new repo "B" pillars in a pair (l/s & r/s). http://www.cjponyparts.com/dynacorn-b-pillar-panel-in-weld-thru-primer-set-1969-1970/p/M3644CWT/ The one problem is I would have to modify them to fit on a coupe, since they are made for a fastback. Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted July 27, 2017 Not a problem ,the only difference is the quarter window slot will need a bit of work Quote Share this post Link to post Share on other sites
Tain 63 Report post Posted July 28, 2017 it would be great to get a template to cut the slot. Quote Share this post Link to post Share on other sites
Mike65 476 Report post Posted July 28, 2017 17 hours ago, Tain said: it would be great to get a template to cut the slot. What do you need exactly, I have a 69 Coupe & would be willing to make a tracing & mail it to you. Quote Share this post Link to post Share on other sites
Tain 63 Report post Posted July 29, 2017 it would be great to get a template of the top half of the b pillar where the quarter window gasket goes. Quote Share this post Link to post Share on other sites
aslanefe 333 Report post Posted July 30, 2017 Why not use the cut out of the original as a template? Quote Share this post Link to post Share on other sites
Tain 63 Report post Posted July 30, 2017 1 hour ago, aslanefe said: Why not use the cut out of the original as a template? the orginal is ruined Quote Share this post Link to post Share on other sites
Mike65 476 Report post Posted July 30, 2017 15 hours ago, Tain said: it would be great to get a template of the top half of the b pillar where the quarter window gasket goes. I will see if I could make a tracing of it for you today. Quote Share this post Link to post Share on other sites