window screws n bolts

[rwcstang 201]

looking for these bolts & Screws (Circled in Red), anyone know what type/size or where i can purchase them

[ashleesmach1 28]

oooh good question !!!!

[wsovonick 10]

I was going through the AMK catalog online and saw this. Could this be what you're looking for?

 

AMK Part number F-2914 (Door Glass - Channel - Bolt-in Glass)

 

http://www.amkproducts.com/Ford_Fastener_Kits.asp

 

BTW, I've just started the restoration of my 69 Mach 1 that I have owned for about seven years. I know that this forum will be a great resource for me as I move forward.

Edited September 27, 2014 by wsovonick

[det0326 179]

The bolt that holds the foot of the window guide rail is 1/4-20-3/4 long with flange head as some of the other bolts. The two nuts on the bolts that go through the window mounting bracket (front and rear) are 1/4-20 also but have a specialized washer it is convex on one side and concave on the other and is attached in a way that allows it to turn independently from the nut. My windows are out at this point and I could could probably get pictures and descriptions If that would help. Let me know and I will dig them out and see what I can do.

Dave

 

BTW mine are 1970 bolt in and from the diagram you posted and marked up it seems that is what you are interested in.

Edited September 27, 2014 by det0326

[rockhouse66 22]

FWIW, I think that bolt that goes in the bottom of the door and retains the guide rail is special shallow head and probably not reproduced.

[BuckeyeDemon 211]

57472 (hex bolt and washer)

1/4-20 thread. 7/16 head, 3/4 OD washer, 5/8 length

 

383278 (hex nut and washer)

1/4-20 thread, 7/16 head, 3/4 OD washer

 

383270 (round spring nut)

1/4-20 shaft diameter, 3/4 diameter

 

382682 (hex bolt and washer)

1/4-20 thread, 7/16 head, TBD OD washer, 49/64 length

 

AMK will more than likely have all of these available.