silverfox999 10 Report post Posted May 25, 2014 I want to put some gas and brake lines under car before i take if off the rotisserie, only problem being I can't quite remember where everything went and my pics are limited, doh ! So as per post, I'd like some help please in the form of pics/diagrams etc. of which route the brake and gas lines run under a '70 Mach 1. Cheers Chris Quote Share this post Link to post Share on other sites
LindenBruce 27 Report post Posted May 25, 2014 I know on my 69 the gas line runs on the outside of the driver's side frame rail. The brake line runs at the top inside of the trans tunnel also on the driver's side. You will need the pinch clips for the lines to hold them against the sheet metal. B. Quote Share this post Link to post Share on other sites
beecj0 11 Report post Posted May 25, 2014 X2 ^^^^^ Quote Share this post Link to post Share on other sites
fvike 173 Report post Posted May 25, 2014 This is a great article, and some great pictures of a restored Boss 429. Most of it is applicable to all '69s. http://www.mustangandfords.com/featured-vehicles/mump-1105-1969-ford-mustang-429-restoration/raven-black.html Quote Share this post Link to post Share on other sites
69volunteer 84 Report post Posted May 25, 2014 The fuel line is in two pieces and connects via hose right at the front of the drivers side door. The challenge for me was where it makes a turn inboard towards the tank Quote Share this post Link to post Share on other sites
silverfox999 10 Report post Posted May 25, 2014 thanks to all who have posted replies, I do have the clips and will follow up the info on here now. I have never posted an a thread on my resto progress to date, here is how I got it and how it is now. Worth me posting a separate resto thread ?? Chris Quote Share this post Link to post Share on other sites
69volunteer 84 Report post Posted May 25, 2014 Nice progress. Looks like you have done a lot of work. Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted May 26, 2014 Yes, a dedicated build thread is the way to go. Here are some links to brake lines, additional links in the thread: http://www.1969stang.com/mustang/forum/showthread.php?t=14475 Bob Quote Share this post Link to post Share on other sites
silverfox999 10 Report post Posted May 26, 2014 Yes, a dedicated build thread is the way to go. Here are some links to brake lines, additional links in the thread: http://www.1969stang.com/mustang/forum/showthread.php?t=14475 Bob Bob, many thanks for that, just what I was looking for and jogged my fading memory, lol. Will put up a build thread in next few days. Chris Quote Share this post Link to post Share on other sites
maxum96 32 Report post Posted May 26, 2014 I know on my 69 the gas line runs on the outside of the driver's side frame rail. The brake line runs at the top inside of the trans tunnel also on the driver's side. You will need the pinch clips for the lines to hold them against the sheet metal. B. No different on the 70's. Quote Share this post Link to post Share on other sites