Kris 90 Report post Posted April 6, 2014 What are you guys using to attach the pieces of trim to the tail light lenses? My originals are in great shape but a few of them have came off. They appear to have a black adhesive on them. Kind of reminded me of either seam sealer or the black windshield adhesive. I don't want to use anything that will damage my lenses as they are originals in perfect condition. Quote Share this post Link to post Share on other sites
BuckeyeDemon 211 Report post Posted April 6, 2014 i cut strips of the double sided tape. Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted April 6, 2014 We used a small amount of black RTV silicone on Steve's. Quote Share this post Link to post Share on other sites
1969vert 55 Report post Posted April 6, 2014 3m super weatherstrip adhesive..Black Quote Share this post Link to post Share on other sites
Stangboy 14 Report post Posted April 7, 2014 I used a little bit of Permatex clear RTV adhesive. They are stuck really well. Quote Share this post Link to post Share on other sites
CJC 15 Report post Posted April 7, 2014 I called Daniel Carpenter who is making the Ford Licensed lens and asked them as I had the same situation. They suggestion E6000 glue that I purchased from Hobby Lobby. It is a clear glue that so far has worked great and held up very well. Quote Share this post Link to post Share on other sites