Patriotgamez 14 Report post Posted April 5, 2014 Curious question... Doing a patch in both rear wheel houses and there appears to be a chunk of brass where the inner and outer wheel houses meet? It was like this on both sides. Anyone know why the factory did this, or am I "special" Quote Share this post Link to post Share on other sites
69droptopgt 10 Report post Posted April 5, 2014 I would guess some sort of brazing for repair but not really sure. Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted April 5, 2014 Common on our cars during construction. Don't know the reason. Bob Quote Share this post Link to post Share on other sites
det0326 179 Report post Posted April 5, 2014 Mine had some brass on the bracket on the 1/4 window area where the 1/4 panel slides in between on both sides. Quote Share this post Link to post Share on other sites
70fastbak 16 Report post Posted April 6, 2014 I was under the impression that they used brazing to 'tack' some areas in place to hold it in position then it got spot welded. Quote Share this post Link to post Share on other sites