Just a Few Items I dont Need

[MikeStang 247]

Ok Gents before I put this stuff on ERAPE I figured I would give fellow enthusiasts first cracks.

 

#1. Complete 8" rear from my 69 Mach 1...No it didnt come with this rear, but its what was there when I got it...Its an open unit with 3.00 gears....seems to be in working order but i cannott verify that, as I have not opened it up or ran it in the car. Only reason i am pretty sure it is what i say is because it had the tag still hanging on it. PRICE...Best offer and you come get it.

 

#2. WAR 9" Case with EQUALOCK 4 Pin POSI. Not to be confused with a TRACLOCK. Dont know the internal condition of this thing, its got some slop in it, and needs complete rebuild. If i remember correct its packing a set of 4.11 gears. But its all there....the Posi unit is out of the housing and the housing has been glass beaded and Primed on the outside and ready for paint and rebuild..........I would consider seperating the posi from the case, but would prefer to sale all as one unit.........Cases go anywhere from 50-100 Bucks on Ebay....and I have yet to find an EQUALOCK Posi on Ebay, so not sure on the price of those, but for some one looking for a unit like this for their numbers matching resto, here ya go.

 

#3 Standard 9" WAB case I think I got those letters right....this is justa a standard run of the mill 9" Case, and I will throw in an open unit with 3.00 gears for free if you buy the case and pay shipping.....its torn down, and case has been glass beaded and primed....All CAses come with pinion supports and adjuster nuts.......50.00 sound ok....

 

#4 Rear deck lid off my 69 MAch 1. If it looked like it had rust in it to me I replaced it with NEW SO this piece has to go...No Holes or rusted through spots, i just wanted new because I know these are prone to rust out....Make Offer

 

#5. FMX Tranny from my MAch 1....Condition ....Unknown...when i got car the guy said it ran till his son ran the car hot and cracked a head, and there the car sat for 10 years....So likley it will need a complete rebuild....MAke offer.....You come get it...or I will ship if u pay freight

 

#6. Complete wiring harness for 69 MAch 1....its not in bad shape, im just going back with Painless. MAke offer.

 

#7. 2 Turbonetics Delta Gate Mark II Waste Gates, these came from my old twin turbo system off my 77 Trans Am.....they were installed to mock up, and fired and run for 15 min, then decided they would not be large enough for my requirements so they were removed....they are in like new condition.......Price....MAke offer.

 

#8. 1 Vortech BOV, cant remember the serial number on it, but I can get pics

 

#9. 1 Pass Side door that came with my MAch 1, it looks rust free, and has no internals or glass...the lock mech is still there but thats it. I just bought 2 new doors because once again I didnt want any chance of rust for at least the next 15 years LOL...Make offer.

 

#10. 1 PAir of 275-60-15 Mickey Thompson Street Et's...Appx 15 passes on these...we ran them on my friends 69 MAch and it rubbed the sides a bit on hard launch and thus we removed them,,,,they have a few small cuts right at the edge of the tread, but nothing that will effect the safety of the tire. plenty of life left in these tires, as they dont require long burn outs.

 

I think that is it for now.

All of this stuff is make offer Pricing, but dont come at me with "oh i will give ya 10 bucks for your tires and pay shipping" Lets be realistic, I know what most of this stuff is worth, but im not looking to make a fortune either. Lets be fair with eachother..........Oh I will accept trades as well...What ya Got.

 

I need........complete weather stripping kit for 69 MAch 1, Upholstry, complete suspension, and all the usual stuff one needs when doing a full on resto :P

Mike

[69shelbycoupe 11]

Where are you located?

[MikeStang 247]

Just outside of Baton Rouge LA.

In Walker

 

Address is 13858 Timberlake Dr.

Walker LA, 70726 if your trying to calculate shipping

[DragPack69 0]

Can you give me a ballpark price you`re looking to get for the wiring harness?

 

John

[MikeStang 247]

Sorry the Harness has got to stay, my friend just reminded me that we will be needing all the plug ins to reinstall on my new harness, unless we want to buy all new ones, which I may do, but for now the harness has come off of the For Sale List....but may be back up after a time that I see i dont need it.

Sorry bout that ..

Mike

[N2Otorious 10]

Turbonetics Delta Gate Mark II Waste Gates

-------------

 

Do you know what size these are? and what size springs? Mounting flanges(Aluminum/steel/Stainless)?

Edited January 20, 2010 by N2Otorious

[N2Otorious 10]

How much do you have to get out of'em?

Edited January 20, 2010 by N2Otorious

[MikeStang 247]

Would like to get 250.00 for both of them. That is Half of what I paid for them New. I think I still have the paper work that came with them. But not sure, have to look.

Ya interested in the BOV as well?

I can get pics of the stuff for ya if you would like.

Mike

[N2Otorious 10]

Would like to get 250.00 for both of them. That is Half of what I paid for them New. I think I still have the paper work that came with them. But not sure, have to look.

Ya interested in the BOV as well?

I can get pics of the stuff for ya if you would like.

Mike

No not really, Need everything in matched pairs, I have a project about 4 projects down of twin T3/T4 Hybrids on a 5.0 in my '31 Model A 5 window coupe w/rumble seat. Plan on hanging the turbos out of the engine bay right above the headlights so when i come up behind someone on the highway, My '31 looks and sounds really pissed off.

 

I might be able to use the gates, I don't know, that project is pretty far down the list.

Edited January 20, 2010 by N2Otorious

[MikeStang 247]

No problem....The reason I was asking about the BOV is because I got this stuff new from a Friend that works exclusively for Ford in their Special projects division, and he sold me both gates and the BOV as a matched Set that would work for a Twin Turbo Application which is what I was doing on my 77TA at the time, and I trust that what Tom Says will work, WILL WORK haha. But im sure you could get your own BOV of which you will only need 1 really if your blowing both turbos into One main pipe and into the carb hat or injection system, what ever the case.

I was only asking 50 bucks for the BOV if you did decide you wanted it.

The gates and the BOV will support and Control up to about 850 to 900 Hp with out boost creep....I was only really looking for 500 hp to the ground with 10 lbs or less of boost, and with the turbos I had that was not going to be a broblem. I could have done upwards of 900 hp with them, but I did not have the bottom end to handle that LOL.

Any how let me know what you want to do, they will not go on Ebay for a few weeks, but all the other crap will be on there tonight.

Mike