Mach1 Driver 560 Report post Posted February 9, 2023 8 hours ago, TexasEd said: Here is a stainless hood trim at NPD. I did not look to see if they have the rest of the grill surround but it could be an option. Edit: Found the stainless grille surround Stone guard/lower radiator surround: Thanks, that's a good find- now we only need the sides 8242-4A and 8243-4A to match. Those would be tough shapes to tool in stainless, but its no problem to chrome the aluminum. 1 TexasEd reacted to this Quote Share this post Link to post Share on other sites
aslanefe 333 Report post Posted February 9, 2023 38 minutes ago, Mach1 Driver said: Thanks, that's a good find- now we only need the sides 8242-4A and 8243-4A to match. Those would be tough shapes to tool in stainless, but its no problem to chrome the aluminum. Do you mean NPD item # 8242-4B :) 1 TexasEd reacted to this Quote Share this post Link to post Share on other sites
Mach1 Driver 560 Report post Posted February 9, 2023 5 hours ago, aslanefe said: Do you mean NPD item # 8242-4B :) Whoa, I didn't see those! Thank you. Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted February 10, 2023 I bought a couple sets of 8242-4B, and only one molding came close to fitting. So I repaired my old ones. And the clip kit for the hood lip molding wasn't long enough to catch on the width, so I dug out and cleaned up my originals. If I hadn't already installed the fender extensions of have taken them into NPD Ventura and gone thru what they had that fit. This was a few years ago, so hopefully quality has improved. But buyer beware. Quote Share this post Link to post Share on other sites
TexasEd 188 Report post Posted February 10, 2023 Yeah the description of one of them says that the fasteners included are junk and get original style Quote Share this post Link to post Share on other sites
TexasEd 188 Report post Posted February 17, 2023 @jmlay I couldn’t attach the pictures to private message. The bottom passenger side sits on top of the driver side. Bottoms should be easy to identify. They are wider, more sculpted profiles, the curves and the screw down points. The top is 2 pieces as well. Quote Share this post Link to post Share on other sites
jmlay 80 Report post Posted February 17, 2023 @TexasEd, Thank you very much. You confirmed I do have an incorrect piece but it is NOT the one the body shop thought was incorrect. I have one coupe/convertible and one fastback. Coupe/convertible are longer than a fastback. 1 TexasEd reacted to this Quote Share this post Link to post Share on other sites