50dan

Original center console good shape no cracks or damage. Been sitting around for 15yrs. Includes extra insert. Located Hamilton Ohio. No shipping. $500 obo

I have all the other parts, I just got mixed up on which bracket was correct. I had a 69 parts car that I took the stuff from. I just noticed the 2 brackets I had were different.

Okay that makes sense thanks. It’s been a while since I’ve messed with any of this stuff. Trying to get my 69 back together with PDB.

Can someone help ID these two pedal supports? I think one is a 1969 and one is a 1970. Based on the nutsert mounts present on the silver one, I think is a 1970?

I’m thinking about doing this upgrade on my 69 with 351W. I seen a lot of good reviews but my question is has anyone tried using this kit with long tube headers? CJ Pony has the kit for $724 but I’m running Hooker Longtubes. I know it says to try the Tri Y headers but I’d like to hear from someone with actual experience. Thanks https://www.cjponyparts.com/borgeson-power-steering-upgrade-kit-289-302-351w-1968-1970/p/PSK16/

These are in very nice shape! Frames are clean. No brackets. $600 pickup in Hamilton Ohio. https://cincinnati.craigslist.org/pts/d/1969-mustang-mach-1-seats/6692945969.html

I'll try flipping the wedge but I don't think that will make it any better.

Lowering everything at least 1". I have 1" front lowering coil springs, then was going to use the negative wedge kit and lower the upper control arm at least 1".

Notice the slight gap between the steel wedge and the control arm? Should the steel wedge be closer to, or touching the control arm? Seems like this small gap gives room for flex?

This is exactly what I have decided to go with except the roller lower arms I've never seen those. I did install a negative wedge kit on my upper control arms the other day. I'll try to post pics here soon. I have to get the template to lower them on the shock tower still. Slow, but progress is underway.

Email sent

Why do you run manual steering? Was it factory manual steering?

Thanks for the replies! all great stuff. I guess I'm just trying to see what my options are to choose from. I don't mind spending up to the $1500 range but I guess it comes down to listening to what others have done and if your happy with your setup. I'm more use to driving modified fox bodies.

I'm looking to get started working on my 69 Sportsroof and get it on the road this summer and get it on the road this summer after sitting for 10 years. Before I spend a bunch of money putting the front suspension back in stock form, what do you guys recommend for upgrading the front end? I've seen coil over set up's, McPherson strut set up's etc. I would like to upgrade the ride and handling quality as best I can without spending a fortune. Pics would be great too thanks!

Holy Shit you do some seriously nice work!! You dont do body work for a living do you? Can you build me one of those hoods too? LOL

Price drop $250

BTT

Price? Email pics to dcjones4 at roadrunner dot com

67-70 390 428 FE 4 speed trans crossmember like new. Blasted and powder coated black. Very nice. Asking $300 plus shipping

Vintage 20 gallon GASBOY transfer tank, cool old pump, never used it so I don't know if it actually works, tank is not rusty, crank turns, has about 10 gallons old gas from a mustang I was working on about 2 years ago. No nozzle or hose. $150 pick up in Hamilton Ohio.

69 pedal support blasted and painted includes disk brake pedal. Asking $75 plus shipping or make me an offer.

After 10yrs of sitting I'm finally going to start working on my 69 Sportsroof. Going to restore my engine compartment and I'm removing everything so I can clean, strip and paint it. How does the plug at the firewall come apart? Also can anyone recommend a new front wiring harness? I'm going to replace it because it's very stiff and brittle. I saw a factory replacement by Alloy Metal Products (AMP) from CJ Pony for $213 or they have an upgraded version by American Autowire for like $649. Should I go back factory or do the upgraded one? I don't plan on adding anything fancy but I guess down the road it's possible. Also does anyone have any advise or suggestions to add while I'm into this under hood project?

Custom front red velour seats done in the 80's. These came out of a car I restored and these seats were too nice to recover. I need black so these are for sale as is. Price is $650 for the pair or I'll trade plus cash on your end for something with nice frames I can recover. Or trade even for equally nice black seats. NO SHIPPING http://cincinnati.craigslist.org/pts/5938000115.html

Swapping my 69 door glass now all I need is glass, lol Looking for some nice sun-x tinted FB door glass please PM me or email to dcjones4@roadrunner.com Thanks!

I need a nice set of nice '70 FB tinted sun x door glass. Glass only. Must be nice condition. I will be at the Columbus Ohio spring swap if you can deliver there or I can pay shipping. Please pm me with price and pics thanks