Caseyrhe

Need to put light buckets on to fenders first, using the rubber gasket that goes between the two. The top inner bucket bolt/nut is easier to get to with fender off

Correct, and blinker actually has a clip in holder, below radio, top right side of heater/ac control

That's what I was thinking, tried the brass ones for "furniture" but brass top slot for flathead broke off. Will figure it out. Thanks for your help, Ford owners think alike.

Does anyone have a picture of the scoop with the indicator housings detached

Where can I get them

The bottom needs to swing out away from body, I started at the back and worked towards front. Used a flat head screw driver to "Un-snap" from bottom then pulled outward with finger tips

I have a 69 Mach, 390 with ac, ps. Car was in boxes, fan is a 5 blade-191/4" fan. Currently using a 2" spacer, giving me 1/2" clearance from bottom crank pulley, from lower radiator hose, and about 3/4" from back of radiator. In addition, fan shroud can't be installed, fan hits it. What is the correct size fan and should it have a fan clutch

How does housing attach to scoop. The screw hole receivers are cut at a 45 degree angle that matches to the 45 degree housing. My hole receivers are not threaded and are close to 1/4" in diameter. The screw kit I bought from CJ are way to small.

How do the blinkers attach to the hood scoop. The holes are not threaded