Footcutter11

Thought I was missing something. I am trying to keep the original flavor with twists. I front spoiler was molded around an original mach 1 chin spoiler.

Thanks! What is that?

Thanks. I am currently adding vents to the side of the air dams for cold air inlets to cool the hot side of the turbos. I like what Silver 69 put up, so I am going to do a bumper tuck. Stay tuned! :)

Removed about 2 inches to raise them up, and rotated them to be in line with lower fascia.

Thanks, very nice. I might try to work some of those elements in.

Think I will do a bumper tuck.

Not yet, but there will be. The sides of the front air dam will have scoops for flowing air over the turbos, and out vents in the hood.

Hood is within 1/4" of fitting. Yay!!!!

Ok, been taking care of ticky tack stuff. Now back to the fab stuff. Intercooler mounted and plumbed. Fabed up a steel lower air dam, it sits a little low, so some adjustment there. Maybe a hinge so I can raise it when needed? Almost finished with the front end, but I do not want to put a bumper on the front. Any ideas?

Thanks! Much appreciated.

Thanks. 800HP.

More mock up.

Don't. I just can't see paying $800 of hard earned cash on Fin door handles....

I have a keyless entry system, and 3 extra actuators (maybe trunk). Electric is the direction I am going. Thanks for the tip! :)

Well, thanks. There is a lot of trial and error that you may not see.... :)

Here it is open with the spring out. Still need to make sure I get door glass clearance.

Yes. Have not decided on mechanical or electrical actuation, but I can do either. The mechanical will be in the form of a bicycle cable, electrical will be in the form of a momentary switch. Electrical seems the best option, since it requires the least amount of force. I saw that to buy them was $600-800 for a pair, which is ridiculous when it only takes $30 in materials, and I like making shit. :)

Flush door handle prototype.

I may steal your idea. Very nice work!

Beautiful!!

Thank you! Having fun.

Little more progress. Firewall time.

Thank you.I got a Dynacorn original hood. I am going to keep all the original lines, and even remove the side scoops behind the door. The custom touches will be the sun roof, rear wing, front spoiler, rear air dam, and side skirts. The goal it to keep the lines nice and clean, with a few subtle details. I may put the bolt on mach1 scoop on.

I get mine from Dragon plate. They have red and blue, and kevlar wrapped CF. I am going to check your guys out for the interior.

Freaking awesome!