mustangstofear

Those wheels are off my 65 fastback that we are taking to SEMA. Should have his wheels in the next to week's.

The rest of the exhaust system is done. Went with 3 inch tips.

That looks nasty :(

I think you're a little slow Bob :)

Decided to take the hood off and shoot some black on the back edge.

I know it's hard to believe, but after spending over 11,000 on this mold, it better fit :)

We have a 3 inch thick book on spec's we have to go by. Every country we ship to have guide lines and require certified engineer testing. All of our IFS had been approved, but we had to have our new Watt's link done. We summited using our engineers and it came in twice as strong as neccessary. We took it one step further, we hired a firm that only does suspension and they came up with the same results. I asked them if there was anything we could do to make it 3 to 4 times stronger. They felt it wasn't necessary but did make a suggestion and we made the change.

That's a good idea, not sure the customer wants it. We were talking about doing some black on the back of the hood like the 68 Shelby style. We had next to nothing for body work on the hood. Just prime and block, really happy how the hood turned out.

Looking for suggestions on some cool headlights.

They turned out nice, you should start selling them.

Did you make the subframe connectors ?

Stick with OEM when available .

We always need help :) Come up for a visit some time . Currently we have a 2 year waiting list and getting longer.

We have a video on the 65-68 windshield install, the backglass is the same procedure. We use Daniel Carpenter for all our gaskets and weatherstrip. I do shave the lip off the top edge of the windshield gasket. Gives more clearance for the top molding on the 65-68

Our new tailpipes we designed made it a breeze to hook up. Trying to find tailpipes to go around a Watt's link, 4 link or a 3 link use to be impossible, but not now :)

After trying the different sets from stainless works that were all too loud we tried a 14" round from Magnaflow. This was much quieter. I called Magnaflow and asked if they made a longer one and they make a 22". It was even better when we tested it in our 65 coyote swap build. On Monday we will put it in this 69.

Needed to install the A-pillar moldings before the dash goes in. We will probably just make some clips to hold the center vent in, can't wait a week to get them.

You the man :) Thanks .

Does anyone know if there are any type of clips that hold the center A/C vent in ?

The console does add strength, but you can order any of our headliners without the console.

It would not be possible to do what you are requesting. Yes, a lot of people like the console.