v8ford70 98 Report post Posted December 3, 2017 My Hood had been removed & painted by previous owner.It doesn't have the J Nuts that the two bolts that hold the hinge bracket screw into.Are they a different size to the fender J Nuts.If so does anyone have the dimensions of one of the J nuts & photos. Thanking you,Cheers Phil Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted December 3, 2017 I'm pretty sure they're the same. The 5/16 nc bolt size definitely is the same, but some of the J nuts around the car are longer where they clip onto the panel. Quote Share this post Link to post Share on other sites
Caseyrhe 650 Report post Posted December 3, 2017 Hood bolts have a larger afixed washer too You can loop a string inside j also, that way if it slips off and tries to go inside the hood, string prevents that. Works great when removing them for paint Quote Share this post Link to post Share on other sites
v8ford70 98 Report post Posted December 6, 2017 Is anyone able to give me the measurements of one of these hood J nuts, total length & width.Thanks Phil Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted December 6, 2017 I measured OAL @ 1-1/4" x 9/16" at the closed end. The bolt shows the captive washer Casey mentioned. Quote Share this post Link to post Share on other sites
v8ford70 98 Report post Posted December 6, 2017 Bob ,Thank you very much for the above photos & measurements great help everything that I require,& thank you very much Casey for your input great idea.Very Much appreciated,Cheers Phil Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted December 7, 2017 De nada mi amigo. Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted December 7, 2017 Same clip as the fenders ,i buy them by the box of 50 from my local paint supply shop. Home depot carries some ,but they may be the shorter one Quote Share this post Link to post Share on other sites