Her69fastback 3 Report post Posted July 31, 2017 I'm looking at putting a IFS front suspension with power rack in wife's 69. Is there anyone out there making one that will work with the stock column? I have found ones that are just the power rack kit only but not the hole IFS kits. Quote Share this post Link to post Share on other sites
barnett468 418 Report post Posted August 1, 2017 Why do you want to do that? Quote Share this post Link to post Share on other sites
Her69fastback 3 Report post Posted August 1, 2017 Because I can Quote Share this post Link to post Share on other sites
Cruzzar 22 Report post Posted August 1, 2017 Most of your IFS applications can be ordered with a power or manual rack since they are basically based on the Mustang II front end geomentry. You will probably have to contact the manufactures to see if they can be connected with the stock column. Be sure you ask specific questions that include will it fit if I use headers, stock z bar (if using a manual trans), etc. Do a search on here to git others opinions as to whose IFS installation positions the motor in the lowest position and any installation problems. Instead of a hydraulic power rack you might want to consider an Electric Power Steering installation and not have to install a power steering pump and hoses on the engine. Quote Share this post Link to post Share on other sites
Her69fastback 3 Report post Posted August 1, 2017 Thanks I'll look into that. Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted August 2, 2017 You can use the stock column with our IFS, you just have to cut it down. Quote Share this post Link to post Share on other sites
Her69fastback 3 Report post Posted August 2, 2017 Do you have a web site I can look at? Quote Share this post Link to post Share on other sites
RogerC 136 Report post Posted August 2, 2017 Google's your friend http://www.mustangstofear.com/ Quote Share this post Link to post Share on other sites
Her69fastback 3 Report post Posted August 2, 2017 Thanks I'll look them up Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted August 4, 2017 Please check out the September edition of Mustang Monthly it has the sub-frame/IFS article on our system. Also, here is a YOUTube link. Thanks! Quote Share this post Link to post Share on other sites