IFS front suspension

[Her69fastback 3]

I'm looking at putting a IFS front suspension with power rack in wife's 69. Is there anyone out there making one that will work with the stock column? I have found ones that are just the power rack kit only but not the hole IFS kits. 

[barnett468 418]

Why do you want to do that?

[Her69fastback 3]

Because I can

[Cruzzar 22]

Most of your IFS applications can be ordered with a power or manual rack since they are basically based on the Mustang II front end geomentry. You will probably have to contact the manufactures to see if they can be connected with the stock column. Be sure you ask specific questions that include will it fit if I use headers, stock z bar (if using a manual trans),  etc. Do a search on here to git others opinions as to whose IFS installation positions the motor in the lowest position and any installation problems. Instead of a hydraulic power rack you might want to consider an Electric Power Steering installation and not have to install a power steering pump and hoses on the engine.

[Her69fastback 3]

Thanks I'll look into that. 

[mustangstofear 608]

You can use the stock column with our IFS,  you just have to cut it down. 

[Her69fastback 3]

Do you have a web site I can look at?

[RogerC 136]

Google's your friend

http://www.mustangstofear.com/

 

[Her69fastback 3]

Thanks I'll look them up

[mustangstofear 608]

Please check out the September edition of Mustang Monthly it has the sub-frame/IFS article on our system. Also, here is a YOUTube link. Thanks!