SunnDogg 18 Report post Posted December 8, 2016 Hi all, Trying to piece together a complete dash for a 69 project and need some help identifying some of the clips. Above the glove box and to the right there are two white plastic clips about an inch apart. Can someone please let me know what these are used for and a possible source to replace them if needed? I am restoring the dash now and they are very brittle. This particular dash likely came out of a Cougar and was not certain if they are specific to that line of car as all the Mustang specific images I can find show these two square holes as empty. Thanks in advance. 1 mapedVem reacted to this Quote Share this post Link to post Share on other sites
69MC 14 Report post Posted December 18, 2016 I'll take a look under my dash and let you know what's there.. stay tuned.. Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted December 19, 2016 My square holes are empty. Have been since I bought the car in 1989. Quote Share this post Link to post Share on other sites
Grenadier116 24 Report post Posted December 19, 2016 It must be a Cougar thing. There are no plastic inserts in my dash at that location. Quote Share this post Link to post Share on other sites
Rsanter 152 Report post Posted December 19, 2016 Those are where a little glove box light mount on the Cougars Typically empty on a mustang but I have seen a couple mustangs that had the inserts and you could tell they had never had screws in them Bob Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted December 20, 2016 I checked my 69 Coupe & the dash has no plastic clips there either. Quote Share this post Link to post Share on other sites
SunnDogg 18 Report post Posted December 20, 2016 Thank you all for the help. On to the next puzzle. Quote Share this post Link to post Share on other sites
69MC 14 Report post Posted December 26, 2016 Yep, same goes for me. Pulled out my dash today and there weren't any clips at all (1969 Mustang Mach 1). See pic below. Quote Share this post Link to post Share on other sites