-
Content Count
3,484 -
Joined
-
Last visited
-
Days Won
103
Posts posted by Mike65
-
-
-
Merry Christmas to everyone here.
-
Do you still need a original fuel sender, I might have one. I would have to look for it since we just moved & it might take a few days. Let me know.
-
On 12/19/2021 at 7:46 PM, 69Mach1 M code said:@Mike65 - Do you remember if the yoke on the pinion shaft from the differential is a 1310 size joint or a larger 1330? The yokes on my original driveshaft from the 351 are 1310's.
I do not remember which u joint I used, it might have been the larger one. I have a 9" rear in my Coupe.
-
On 12/18/2021 at 12:13 PM, det0326 said:it has been quite a while and I am old.
Me too.
-
There were no V8 2 door Explorers, Ford never put a V8 in the 2 door Explorers, just the 4 doors.
-
7 hours ago, 69Mach1 M code said:Has anyone that went the route of use an aluminum Exploder driveshaft had any problems with clearance in the floor tunnel? The aluminum driveshaft I obtained from a friend is diameter 3.465 inches and the stock steel 351W driveshaft I have is diameter 2.76 inches.
As I stated in my post above from Dec. 2020 I used an aluminum driveshaft from an Explorer had it shortened & installed it in my 69 Coupe behind a T-5 trans mated to a midly built 5.0.
-
On 11/13/2021 at 8:46 AM, 1969vert said:Oh yeah forgot how much I hate glue in glass and alignment...
You should swap over to the 1970 bolt in glass, that is what I am doing.
-
Nice work Jesse.
-
It may be a silly question but do you have the headlight extension wires for the 69 Mustang headlights like in the attached link?. I think you are missing them.
Mustang Headlight Extension Wire 1969 | CJ Pony Parts
BTW that is a beautiful blue, is that a Ford color?.
-
19 hours ago, Vicfreg said:He's old, like us.... lol
Who are you calling old? Oh wait I resemble that remark. LOL :)
-
My 69 Coupe has the light also.
-
All that did was muddy the waters.
-
Looks GREAT! Looks like the color of my 2000 Ranger.
-
Nice work Vic.
-
-
-
That sucks Brian, so sorry you got taken.
-
-
On 10/12/2021 at 3:44 PM, Bryant said:through the firewall then into the tunnel similar to the rear brake line?
I am going to run the wiring to the T-5 trans like the factory did down the outside of the firewall.
-
On my 69 Coupe I am going to run the wires to the T-5 trans in a harness cover down the firewall to the trans.
-
Congrats Rich, the Mach looks awesome.
-
-
Nice work Vic. That is one serious rivnut tool. I have a smaller rivnut tool that looks like a pop rivet gun & it works for what I need it for.
Original fuel sender
in Parts for Sale / Wanted
Posted · Report reply
I found the sender, it is an original Ford fuel sender with the Ford logo & part #- C9WF-9275-A stamped in it by the electrical connection. I have to test it to see if it is good or not. I will let you know.