69shelbycoupe

I didn't see one that was precut or any rear valance that was shelby specific when I was looking

stangme428 I have some headers already but thanks. In the post above the one with the exhaust you can see them hanging after ceramic paint. I can take some pics of how the exhaust is mounted. I don't have any at the moment.

It is not as high as the spoiler on your car in your sig pic

Doing some more body work. I ran all new stainless fuel lines to the tank. I'm working right now on getting all the wiring, accessories, aluminum radiator, etc all hooked to to fire this bad boy up! Right now I'm focusing on getting it running. After that I'll be welding in the 4 point roll bar. Then probably finishing the body work for paint. It's going slow but I'm hoping to have it finished and on the road this summer.

New gas tank. Undercoated the whole underneath of the car. Bolted the shelby rear exhaust collector up so I could cut the rear valance to fit the shelby center exit exhaust. All new stainless brake lines and hardware, shocks and suspension in the rear.

New drums. I put a 1 1/8" front sway bar on. Dropped the Cleveland in. Painted the long tube headers.

Well here are some since I haven't been able to post. Got some more body work done. Put all new hardware in for brakes. All new stainless steel line, hydralic wheel cylinders, master cylinder, etc. Also put new shelby lowering springs and KYB gas struts

For the past year I've had problems with this website and not being able to view posts or post anything myself. Finally I got hold of an administrator and he corrected it so now I'm back....lol I had a couple big life changes so the build has been slow but I'm back working on the car again. I'll post some updated pics soon

It was regular order with the option to not block the rear seat. They make cages with different options. I'm not sure what the car is next to mine. My car is at a friends garage and that is something he is working on for someone else.

I finally decided on my roll bar. I got a weld in one from auto weld chassis in Danville, PA. It is a four point that clears the rear seat. The rear bars follow the roofline and back window down through the rear deck and into the trunk. Just what I was looking for.

That is true. The best is to remove it all together not for weight but for lift in the front to get weight transfer. It will not handle well on the street though

I liked the recess with the mess is why I'm doing it...haha. Pricey but I like the look. My mesh pieces don't have pinholes for the letters in them.

ok thanks. I didn't get a deal on those mesh pieces. I bought them straight from tony branda. Yeah they were $300

Looking good. I have the mesh trim and shelby lettters already for my trunk but don't have the flip down license plate bracket..haha. Where did you get it from. I haven't found one yet.

If you can get exact backspacing including spacers if used. I know they are 18x10 and 18x9 but the backspacing would be nice so I would know what to order for it to fit tucked in my wheels with no mods and lowered...thanks

That is my thought...haha They didn't make one where the dipstick hole goes straight through unless someobody wanted to check the air level...haha

The dipstick hole goes into the pan. That is where you fill it at.

Still very slow. I don't have paint on it yet but hope to very soon.

Yeah if you can find out exact backspacing that would be great. I was only going with 17's but might go 18's since they fit without any modifications. I like that they tuck in the wheel well in the front and rear too

What is the wheel backspacing? I didn't know that 315's would fit with just lowering springs. Did you have to roll the lip?

Very nice car. I'm wondering the same. How did you fit the 315's in the rear. Would love to do that myself.

blowngt92, Do you have the rear lowered? It doesn't look like it. What backspacing are you using? I want 285's in the rear but I am lowering it an inch or two and don't think they will fit in the wheel wells

blowngt92, Do you have the rear lowered? It doesn't look like it. What backspacing are you using? I want 285's in the rear but I am lowering it an inch or two and don't think they will fit in the wheel wells

It's been awhile since I've posted anything but here are some updated pics of it in some etching primer to see all the imperfections that need fixed before the epoxy primer. Sorry for crappy cell phone pics.

haven't come up with anything yet. I am still undecided.