shelbyshelby 52 Report post Posted October 8, 2017 Im building my Mach 1 from a basket case so I don't have any reference photos, so I need help figuring out some plug ins if anybody has their car apart to photo for me. I recently traced a short to ground issue in my dash lights to some plug ins installed incorrectly in the center to right hand side. I need to know where the harnesses shown are plugged in. I'm assuming the small harness is the clock harness and the bigger one I think, 1 leg is for cigarette lighter. My car has the console but I don't yet have the harness. I can't even figure out where the ground is supposed to connect. Any photos of the installled harness would be great. Quote Share this post Link to post Share on other sites
Raven R code 281 Report post Posted October 8, 2017 Little one is the clock harness. The longer one does look like the console harness but not 100%. Quote Share this post Link to post Share on other sites
shelbyshelby 52 Report post Posted October 8, 2017 This is the only plug I see in the area and assuming at least the clock plugs in there. There is multiple ways to plug things in and the polarity can get reversed real quick Quote Share this post Link to post Share on other sites
Midlife 814 Report post Posted October 9, 2017 Indeed, the small harness is the clock harness. As for the larger harness, it is not the cigarette extension harness, as it would need a 90* slip-on connector and a blue/white wire. That harness does not have a two pin male/female plug either. I believe it is the console harness as well. Quote Share this post Link to post Share on other sites