1969_Mach1 333 Report post Posted March 6, 2017 The CPP box is smaller. I looked at both of them when I did my conversion. I liked the fact the CPP box was smaller. But, I chose the Borgeson box because both CPP's catalog and one of their salesmen mentioned their steering box sometimes hits the shock tower and the fix is to use a hammer and dent the shock tower. That plus CPP's customer service and return policy seems to be horrible. Quote Share this post Link to post Share on other sites
prayers1 153 Report post Posted March 8, 2017 1969_Mach1- Good call on the carbine bit, grinded away like butter and now fits like a glove, I was a little hesitant to cut so much off the tubes, so I cut 3/4" on the Inner & Outer, test fitted everything and was an 1/8" from the rag joint. Took it back out and cut another 1/4", fits real good now. Should of did what you said in the first place. Thanks for the info!!! Quote Share this post Link to post Share on other sites
1969_Mach1 333 Report post Posted March 8, 2017 ​You're welcome. Once in a while I have some helpful information. Quote Share this post Link to post Share on other sites