Rsanter 152 Report post Posted March 12, 2016 I am getting ready to put a 70 mach sway bar in my 69 conv. Anyone have pictures of their original install for me to,use as reference? Looking for,orientation of the plates and such Bob Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted March 12, 2016 I have one but it is out of the car .probably wouldnt do you any good . Quote Share this post Link to post Share on other sites
Rsanter 152 Report post Posted March 12, 2016 I need to see the orientation of the plate that goes between the shock plate and the spring. Bob Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted March 12, 2016 This one is from a 70 with a 428 and automatic Quote Share this post Link to post Share on other sites
Rsanter 152 Report post Posted March 13, 2016 From the orientation I see, then the plates go with the link hole to the front outside position. If that is the case that makes it easier for me as I wanted to make tie down plates that go between the shock plate and the spring for strapping the car to the trailer. In this case I'm thinking I may make a plate that does both the sway bar link and the tie down point Bob Quote Share this post Link to post Share on other sites
1969_Mach1 333 Report post Posted March 13, 2016 Yes, the link hole in the plate goes to the front outside position. Quote Share this post Link to post Share on other sites
Rsanter 152 Report post Posted March 13, 2016 Excellent, thanks Bob Quote Share this post Link to post Share on other sites