Jump to content
Sign in to follow this  
CobraMan

70 Wiring Dakota Digital Gauge Change

Recommended Posts

I'm going nuts trying to locate the wiring diagram that reflects the color codes in the "Plug" that snaps from the wiring harness the the Dash Cluster.

 

I'm changing over from the stock analog setup to the Dakota Digital set. Their box claims to make it easy (If you know what the current wires do what...)

 

Any help is appreciated.

 

Cheers,

Share this post


Link to post
Share on other sites

The dash cluster connector is labeled with pins 1 through 18. Here's the call-out for the standard dash cluster.

1. Empty

2. green/white, 50, LH turn signal

3. empty

4. red/white, 39, temperature sending unit

5. yellow/white, 29, fuel sending unit

6. purple, 977, dual brake warning switch

7. red/yellow, 643, power for dual brake warning switch

8. black, 57, ground

9. empty

10. empty

11. violet and black wires, 484 and 30, constant voltage regulator input (resistor wire) and empty wire (used to help crimp the resistor wire)

12. blue/red, 19, dash lamps

13. white/blue, 49, RH turn signal

14. white/red, 31, oil pressure sending unit

15. green/black, 34, high beam indicator light

16. yellow, 654, ammeter

17. red, 655, ammeter

18. empty

Share this post


Link to post
Share on other sites

I am a beginner of the Google+ suite but I gave it a try. I'm hoping to get answers on what these wires, "Duties" are. And, how they should be properly configured.

 

Once you land on my Google+ page, Select the photo block for expanded pics.

 

Cheers

Edited by CobraMan

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...