latoracing 256 Report post Posted November 30, 2014 I have seen the Gateway cars in person, and the interior looks unmolested. You can fit a 18" x 12" wide wheel with a 335 into a 15" wheel well, one inch wider than stock. (measured from the fender lip) It would be on the tight side, as far as lateral movement, but it would fit. I would triple check the interior panel fit before going this route, as the tabs (as buening posted) don't allow for much trimming. The stock bump stop will have to be removed as well to help clear the inner wheel area, it's all in the way. If you all go after this project, take a bunch of pics and let us know how it turns out. Quote Share this post Link to post Share on other sites