jerrywmalcolm 21 Report post Posted May 22, 2014 has any one installed a new set of boomarang rear side vent window trim?, is it hard to do, this is for a 69 mach 1, thanks jerry Quote Share this post Link to post Share on other sites
jmlay 80 Report post Posted May 22, 2014 (edited) Not hard but you have to remove the interior panels in order to complete the task. Mustang monthly had an article on how to replace the 1/4 windows that would be very useful, can not find it at this moment. maybe not as handy as I thought...: http://www.mustangandfords.com/how-to/paint-body/mump-0606-1969-ford-mustang-window-frame/photo-gallery/ Edited May 22, 2014 by jmlay Quote Share this post Link to post Share on other sites
3pedal 95 Report post Posted May 22, 2014 I just installed a set of Ford Tooling Boomerangs on my 70 Mach during a full restoration..I sent back 3 other sets before I bought the Ford Toolings bad fit...fiber glass side panels have to be off then remove 3 speed nuts on each...I calked the bottoms with dum dum... Not sure if the old ones will come out without removing the stainless doo hickey that covers the drip rail and the booms...calked the body to boomerangs with dum dum behind qtr. windows....joe Quote Share this post Link to post Share on other sites