Kingfish 11 Report post Posted March 29, 2014 I've had a Ford Stripe Kit for no telling how long. I'm presuming and hoping it's still good. My other concern is applying it to the trunk lid. I attempted this several years ago with disastrous results. I had all of these bubbles in the stripe that I couldn't squeegee out. So I gave up! What are the tricks to applying one? And are the newer after market ones easier to apply? Thanks for any help! Steve. Quote Share this post Link to post Share on other sites
BuckeyeDemon 211 Report post Posted March 29, 2014 i used a product called slide on application gel. i was a rookie when i did it. But overall thought it went pretty easy. i also used new stripes. Quote Share this post Link to post Share on other sites
Guillaume69 150 Report post Posted March 29, 2014 (edited) Soapy water works as well. Have the surface wet and soapy, then put the stripe. You'll be able to slide it around a little and get rid of bubbles as long as water has not dried. You also want to remove excess water from under the stripe with a plastic (credit card) type of tool. Edited March 29, 2014 by Guillaume69 Quote Share this post Link to post Share on other sites